ASTM A572 Tsarin Karfe a Ma'ajiyar Karfe Tsarin Gina Kayan Gini
AIKACE-AIKACE
Ginin Tsarin Karfe: An gina shi da ƙarfe mai ƙarfi, tsarin ginin yana da ƙarfi, mai ɗorewa kuma mai sassauƙa, yana jure girgizar ƙasa da iska mai ƙarfi tare da saurin gini da kuma tsarin sararin samaniya mai sassauƙa.
Gidan Tsarin Karfe: Tanadin makamashi da kariyar muhalli a cikin firam ɗin ƙarfe mai sauƙi don rufin rufi da gini cikin sauri.
Karfe Structure Ma'ajiyar Kayan Ajiya: Ginin rumbun adana kayan ƙarfe mai tsayi wanda aka tsara don aikin hawa biyu ko kuma wurin ajiye kayan ajiya mai tsayi tare da ginin rumbun adana kayan ajiya.
Ginin Masana'antar Gine-gine na KarfeTsarin budewa, fadi mai faɗi da kuma ƙarfin firam ɗin ƙarfe ya sa ya dace da nau'ikan samar da kayayyaki na masana'antu da yawa.
BAYANIN KAYAN
Core karfe tsarin kayayyakin don masana'anta gini
1. Babban tsarin ɗaukar kaya (wanda ya dace da buƙatun girgizar ƙasa na wurare masu zafi)
| Nau'in Samfuri | Kewayon Bayanai | Babban Aikin | Wuraren Daidaitawa na Tsakiyar Amurka |
|---|---|---|---|
| Firam ɗin Portal | W12×30 ~ W16×45 (ASTM A572 Gr.50) | Babban rufin da bango mai ɗauke da kaya | Haɗaɗɗun haɗin gwiwa don juriya ga girgizar ƙasa, an inganta sashe don sauƙin nauyi da sauƙin jigilar kaya |
| Ginshiƙin Karfe | H300×300 ~ H500×500 (ASTM A36) | Yana tallafawa benaye da firam | Masu haɗin girgizar ƙasa da aka saka, waɗanda aka yi amfani da su wajen tsoma ruwan zafi (zinc ≥85 μm) don yanayin danshi |
| Tashar Crane | W24×76 ~ W30×99 (ASTM A572 Gr.60) | Gilashin ɗaukar kaya don cranes | Tsarin ɗaukar kaya mai yawa (cranes na tan 5-20), katakon ƙarshe tare da faranti masu jure yankewa |
2. Kayayyakin tsarin rufewa (mai hana yanayi + hana lalata)
Rufin Purlins: Daga C12×20 zuwa C16×31, an yi amfani da hot mite, mai nisan mita 1.5-2. Sun dace da bangarorin ƙarfe masu launi da juriya ga guguwa har zuwa matakin 12.
Bangon Purlins:Z10×20 zuwa Z14×26 tare da fenti mai hana tsatsa (busasshen feshi na gishiri sama da awanni 1000) - kuma yana da ramukan iska don sanya iska ta shiga yanayin danshi na masana'antar zafi.
Tsarin Tallafi: Karfe mai zagaye mai galvanized Φ12~Φ16 da kusurwa (kusurwar ƙarfe L50×5) don ƙarfafa daidaiton gefe akan ƙarfin iska na guguwa).
3. Tallafawa kayayyakin taimako (gyaran ginin gida)
Abubuwan da aka haɗa: Farantin ƙarfe mai kauri da aka yi da galvanized mai zafi (kauri mm 10-20) don kafa siminti, wanda ya shahara a Costa Rica da sauran ƙasashen Tsakiyar Amurka.
Ƙullun: Maimakon walda a wurin aiki, ana amfani da ƙusoshin ƙarfi masu ƙarfi (mataki na 8.8, mai zafi mai narkewa) waɗanda ke rage lokacin ɗagawa.
Kariyar Wuta da TsatsaRufin da aka yi da ruwa mai hana tsatsa (≥1.5 hours na kariya daga wuta), rufin acrylic mai hana tsatsa mai jure wa UV (≥ shekaru 10 na aiki), wanda ya dace da buƙatun muhalli na gida.
SARRAFA TSARI NA KARFE
| Hanyar Sarrafawa | Injinan da aka Yi Amfani da su | Bayani |
|---|---|---|
| Yankan | Masu yanke plasma/wutar CNC, yanke | Yanke wuta a cikin plasma ko don faranti/sassan ƙarfe; yanke faranti masu sirara masu girman daidai |
| Ƙirƙira | Injin lanƙwasa sanyi, birki mai latsawa, injin birgima | Lanƙwasawa cikin sanyi don C/Z purlins, magudanar ruwa, kayan gyaran gefen; birgima don sandunan tallafi masu zagaye |
| Walda | Bakan da aka nutsar, baka mai hannu, masu walda na CO₂ | Bakin da aka nutse don ginshiƙai/bishiyoyin H; walda da hannu don faranti na gusset; walda CO₂ don sassa siriri |
| Yin rami | Injin hakowa na CNC, injinan hudawa | Raƙuman haƙa ramuka tare da CNC; buga ƙananan rukuni tare da daidaiton girma da matsayi |
| Maganin Fuskar | Injin harba bindiga/yashi, niƙa, layin galvanizing | Cire tsatsa, niƙa walda, yin amfani da galvanizing mai zafi don ƙusoshin da tallafin tsarin |
| Taro | Dandalin haɗa abubuwa, kayan aikin aunawa | Kafin a haɗa ginshiƙai, sanduna, da tallafi; an wargaza su bayan an duba girma |
GWADA GIRMAN KARFE
MAGANIN KAN LOKACI
Nunin Jiyya na Fuskar
-
Rufin da ke ɗauke da sinadarin zinc na Epoxy
-
An yi amfani da sinadarin galvanized mai zafi (≥85 μm, tsawon rai na shekaru 15-20)
-
Rufin mai baƙi
MAKUNKULA DA JIRGIN SAUYA
Marufi:
-
An matse ƙarfe sosai don kare saman da kuma kiyaye tauri yayin sarrafawa.
-
An naɗe shi da kayan hana ruwa shiga, filastik, ko takarda mai hana tsatsa; ƙananan kayan haɗi a cikin akwatunan katako.
-
An yi wa bangarori da fakiti lakabi a sarari don aminci, sauƙin saukewa da kuma sauƙin shigarwa.
Sufuri:
-
Ana jigilar kaya ta cikin akwati ko babban akwati dangane da girman da wurin da za a kai shi.
-
An ɗaure manyan sassa masu nauyi ko manyan madauri da ƙarfe da kuma ƙarfen katako don hana motsi ko lanƙwasawa.
-
Duk jigilar kayayyaki sun cika ƙa'idodin sufuri na duniya, suna tabbatar da isar da kaya cikin aminci da kan lokaci ta hanyar dogayen wurare ko jigilar kaya ta teku.
FA'IDODINMU
Tallafin Sipaniya a Ƙasashen Waje
Ƙungiyoyinmu na ƙasashen waje suna jin Sifaniyanci kuma suna taimaka wa abokan ciniki a LATAM da EU ta hanyar sadarwa, kwastam, takardu, da dabaru don samun ingantaccen sabis.
Kayan da aka Shirya
Muna adana isassun kayan H-beams, I-beams, da sauran kayayyaki don isar da su cikin sauri da kuma buƙatun gaggawa na aiki.
Marufi na Ƙwararru
Ana cika kayayyakin bisa ƙa'idodin jigilar kaya ta teku da fale-falen ƙarfe, murfin hana ruwa shiga, da kuma kariyar kusurwa, wanda ke tabbatar da aminci wajen sarrafawa da isar da su.
Ingancin jigilar kaya
Tare da amintattun abokan jigilar kaya da sharuɗɗa masu sassauƙa (FOB, CIF, DDP), muna ba da garantin isar da kaya akan lokaci da ingantaccen bin diddigin teku ko jirgin ƙasa.
Tambayoyin da ake yawan yi akai-akai
T: Menene takamaiman tsarin ƙarfe naka?
A: Karfenmu ƙa'idodin Amurka ne da ake amfani da su kamar ASTM A36, A572, A588. A36 ƙarfe ne mara ƙarfe wanda ke da kyakkyawan tsari da sauƙin walda; A588 yana jure yanayi don amfani a cikin gida da waje.
T: Ta yaya ake tabbatar da ingancin ƙarfe?
A: Daga amintattun injinan niƙa masu ƙarfin QC. Ana gwada dukkan ƙarfe don sinadarai, na inji, kuma ana gwada su ta hanyar gwajin NDE (ultrasonic, magnetic barbashi).
T: Ta yaya ake sarrafa tsatsa a wurare masu zafi da danshi?
A: Muna amfani da sinadarin galvanizing mai zafi (zinc ≥85 μm). Don ƙarin kariya, fenti mai hana tsatsa acrylic yana ba da kariya ta shekaru 10 na UV da dorewa.
T: Maganin lalata da ƙarfin ƙarfe shin yana da tasiri ga ƙarfe?
A: A'a. Yin amfani da galvanizing ko wasu magungunan hana lalata na iya kare ƙarfe ba tare da rage ƙarfi ba, kiyaye aiki da tsawaita tsawon rai.
T: Shin an ƙera kayayyakinku ne don biyan buƙatun girgizar ƙasa a Amurka?
A: Eh. Muna amfani da maɓallan da ke jure girgizar ƙasa (haɗin da ke da alaƙa da bolt), haka kuma muna gudanar da lissafin ƙarfin girgizar ƙasa na gida don kada ya haifar da gazawar walda mai rauni.
T: Yaya batun kwanciyar hankali ga tsarin gaba ɗaya?
A: Zane-zane Sun haɗa da tsarin ɗaukar kaya mai kyau (firam ɗin portal, ginshiƙai, sandunan crane) da tsarin tallafi (sandunan ɗaure, maƙallan kusurwa) wanda ke da aiki biyu na ƙarfafa kwanciyar hankali a gefe a ƙarƙashin al'ada da matsananci.
Adireshi
Bl20, Shanghecheng, Shuangjie Street, gundumar Beichen, Tianjin, China
Imel
Waya
+86 13652091506
