China Factory H Beams ASTM A36 A572 Hot Rolled H Sashe Galvanized H Karfe katako ginshiƙi a Stock
HANYAR SAMUN SAURARA
Tsarin samarwa don daidaitattun H-beams yawanci ya haɗa da matakai masu zuwa:
Raw Material Preparation: Danyen kayan don H-beams yawanci billet ɗin ƙarfe ne. Ana tsabtace waɗannan billet ɗin kuma ana dumama su don shirya don sarrafawa da ƙira na gaba.
Hot Rolling: Ana ciyar da billet ɗin da aka riga aka zafafa a cikin injin mirgina mai zafi. A cikin injin mirgina mai zafi, ana birgima billet ɗin ta hanyar rollers da yawa, a hankali suna samar da siffar giciye na H-beam.
Aiki na sanyi (Na zaɓi): A wasu lokuta, don inganta daidaito da ingancin saman H-beam, H-biam masu zafi na iya yin aikin sanyi, kamar mirgina sanyi da zane.
Yankewa da Kammalawa: Bayan mirgina da yin aiki mai sanyi, ana yanke H-beams kuma an gama su don saduwa da takamaiman girma da tsayi kamar yadda abokin ciniki ya buƙata.
Jiyya na Surface: Ana tsabtace H-beams kuma ana bi da su tare da rigakafin tsatsa don tabbatar da ingancin ƙasa da juriya na lalata.
Dubawa da Marufi: Ƙarshen H-beams suna jurewa ingancin dubawa, gami da dubawa don bayyanar, daidaiton girma, da kaddarorin inji. Da zarar sun cancanta, ana tattara su kuma a tura su ga abokin ciniki.
GIRMAN KYAUTATA
| Nadi | Unt Nauyi kg/m) | Standard Secional girma mm | Sashe Ama (cm² | |||||
| W | H | B | 1 | 2 | r | A | ||
| HE28 | AA | 61.3 | 264.0 | 280.0 | 7.0 | 10.0 | 24.0 | 78.02 |
| A | 76.4 | 270.0 | 280.0 | 80 | 13.0 | 24.0 | 97.26 | |
| B | 103 | 280.0 | 280.0 | 10.5 | 18.0 | 24.0 | 131.4 | |
| M | 189 | 310.0 | 288.0 | 18.5 | 33.0 | 24.0 | 240.2 | |
| HE300 | AA | 69.8 | 283.0 | 300.0 | 7.5 | 10.5 | 27.0 | 88.91 |
| A | 88.3 | 200.0 | 300.0 | 85 | 14.0 | 27.0 | 112.5 | |
| B | 117 | 300.0 | 300.0 | 11.0 | 19.0 | 27.0 | 149.1 | |
| M | 238 | 340.0 | 310.0 | 21.0 | 39.0 | 27.0 | 303.1 | |
| HE320 | AA | 74.3 | 301.0 | 300.0 | 80 | 11.0 | 27.0 | 94.58 |
| A | 97.7 | 310.0 | 300.0 | 9.0 | 15.5 | 27.0 | 124.4 | |
| B | 127 | 320.0 | 300.0 | 11.5 | 20.5 | 27.0 | 161.3 | |
| M | 245 | 359.0 | 309.0 | 21.0 | 40.0 | 27.0 | 312.0 | |
| HE340 | AA | 78.9 | 320.0 | 300.0 | 85 | 11.5 | 27.0 | 100.5 |
| A | 105 | 330.0 | 300.0 | 9.5 | 16.5 | 27.0 | 133.5 | |
| B | 134 | 340.0 | 300.0 | 12.0 | 21.5 | 27.0 | 170.9 | |
| M | 248 | 377.0 | 309.0 | 21.0 | 40.0 | 27.0 | 315.8 | |
| HE360 | AA | 83.7 | 339.0 | 300.0 | 9.0 | t2.0 | 27.0 | 106.6 |
| A | 112 | 350.0 | 300.0 | 10.0 | 17.5 | 27.0 | 142.8 | |
| B | 142 | 360.0 | 300.0 | 12.5 | 22.5 | 27.0 | 180.6 | |
| M | 250 | 395.0 | 308.0 | 21.0 | 40.0 | 27.0 | 318.8 | |
| HE400 | AA | 92.4 | 3780 | 300.0 | 9.5 | 13.0 | 27.0 | 117.7 |
| A | 125 | 390.0 | 300.0 | 11.0 | 19.0 | 27.0 | 159.0 | |
| B | 155 | 400.0 | 300.0 | 13.5 | 24.0 | 27.0 | 197.8 | |
| M | 256 | 4320 | 307.0 | 21.0 | 40.0 | 27.0 | 325.8 | |
| HE450 | AA | 99.8 | 425.0 | 300.0 | 10.0 | 13.5 | 27.0 | 127.1 |
| A | 140 | 440.0 | 300.0 | 11.5 | 21.0 | 27.0 | 178.0 | |
| B | 171 | 450.0 | 300.0 | 14.0 | 26.0 | 27.0 | 218.0 | |
| M | 263 | 4780 | 307.0 | 21.0 | 40.0 | 27.0 | 335.4 | |
| Nadawa | Naúrar Nauyi kg/m) | Matsayin Sashe Dimersion (mm) | Sashe Yanki (cm²) | |||||
| W | H | B | 1 | 2 | r | A | ||
| HE50 | AA | 107 | 472.0 | 300.0 | 10.5 | 14.0 | 27.0 | 136.9 |
| A | 155 | 490.0 | 300.0 | t2.0 | 23.0 | 27.0 | 197.5 | |
| B | 187 | 500.0 | 300.0 | 14.5 | 28.0 | 27.0 | 238.6 | |
| M | 270 | 524.0 | 306.0 | 21.0 | 40.0 | 27.0 | 344.3 | |
| HE550 | AA | t20 | 522.0 | 300.0 | 11.5 | 15.0 | 27.0 | 152.8 |
| A | 166 | 540.0 | 300.0 | t2.5 | 24.0 | 27.0 | 211.8 | |
| B | 199 | 550.0 | 300.0 | 15.0 | 29.0 | 27.0 | 254.1 | |
| M | 278 | 572.0 | 306.0 | 21.0 | 40.0 | 27.0 | 354.4 | |
| HE60 | AA | t29 | 571.0 | 300.0 | t2.0 | 15.5 | 27.0 | 164.1 |
| A | 178 | 500.0 | 300.0 | 13.0 | 25.0 | 27.0 | 226.5 | |
| B | 212 | 600.0 | 300.0 | 15.5 | 30.0 | 27.0 | 270.0 | |
| M | 286 | 620.0 | 305.0 | 21.0 | 40.0 | 27.0 | 363.7 | |
| HE650 | AA | 138 | 620.0 | 300.0 | t2.5 | 16.0 | 27.0 | 175.8 |
| A | 190 | 640.0 | 300.0 | t3.5 | 26.0 | 27.0 | 241.6 | |
| B | 225 | 660.0 | 300.0 | 16.0 | 31.0 | 27.0 | 286.3 | |
| M | 293 | 668.0 | 305.0 | 21.0 | 40.0 | 27.0 | 373.7 | |
| HE700 | AA | 150 | 670.0 | 300.0 | 13.0 | 17.0 | 27.0 | 190.9 |
| A | 204 | 600.0 | 300.0 | 14.5 | 27.0 | 27.0 | 260.5 | |
| B | 241 | 700.0 | 300.0 | 17.0 | 32.0 | 27.0 | 306.4 | |
| M | 301 | 716.0 | 304.0 | 21.0 | 40.0 | 27.0 | 383.0 | |
| HE800 | AA | 172 | 770.0 | 300.0 | 14.0 | 18.0 | 30.0 | 218.5 |
| A | 224 | 790.0 | 300.0 | 15.0 | 28.0 | 30.0 | 285.8 | |
| B | 262 | 800.0 | 300.0 | 17.5 | 33.0 | 30.0 | 334.2 | |
| M | 317 | 814.0 | 303.0 | 21.0 | 40.0 | 30.0 | 404.3 | |
| HE800 | AA | 198 | 870.0 | 300.0 | 15.0 | 20.0 | 30.0 | 252.2 |
| A | 252 | 800.0 | 300.0 | 16.0 | 30.0 | 30.0 | 320.5 | |
| B | 291 | 900.0 | 300.0 | 18.5 | 35.0 | 30.0 | 371.3 | |
| M | 333 | 910.0 | 302.0 | 21.0 | 40.0 | 30.0 | 423.6 | |
| HEB1000 | AA | 222 | 970.0 | 300.0 | 16.0 | 21.0 | 30.0 | 282.2 |
| A | 272 | 0.0 | 300.0 | 16.5 | 31.0 | 30.0 | 346.8 | |
| B | 314 | 1000.0 | 300.0 | 19.0 | 36.0 | 30.0 | 400.0 | |
| M | 349 | 1008 | 302.0 | 21.0 | 40.0 | 30.0 | 444.2 | |
ENH- Karfe Siffar
Darasi: EN10034: 1997 EN10163-3:2004
Musammantawa: HEA HEB da HEM
Matsayi: EN
SIFFOFI
Faɗaɗɗen Flanges: Na sama da ƙananan sassanH-biyu(wanda ake kira "flanges") suna da faɗi sosai, tare da samansu na ciki da na waje yawanci iri ɗaya ne. Wannan yana ba su babban sashe modules da lokacin inertia a fadin faɗin su, yana haifar da juriya na musamman.
Mafi kyawun Rarraba Abu: An fi mayar da kayan abu zuwa ga flanges, nesa da axis na tsaka tsaki. Wannan ƙira yana haɓaka amfani da kayan aiki yayin da yake riƙe ƙarfi, yana haifar da haɓakar ɗaukar nauyi fiye da na al'ada I-beams na nauyi ɗaya.
Maɗaukakin Ƙarfin Ƙarfi: Godiya ga ingantattun sashin giciye, H-beams na iya tsayayya da manyan lodi a tsaye da lokacin lanƙwasawa, yana sa su dace don amfani da katako da ginshiƙai.
Madalla da kwanciyar hankali: Faɗin flanges suna ba da ingantaccen kwanciyar hankali, musamman idan aka yi amfani da su azaman membobin matsawa (kamar ginshiƙai), suna haɓaka juriyarsu na lankwasa ta gefe da tarkace idan aka kwatanta da na al'ada I-beams.
KYAUTATA KYAUTATA
H-bamBukatun dubawa da farko sun haɗa da abubuwa masu zuwa:
ingancin bayyanar: Halin bayyanar H-beams zai bi ka'idodi masu dacewa da buƙatun oda. Filayen ya zama santsi da lebur, ba tare da lahani a fili kamar hakora, karce, da tsatsa ba.
Girma: Tsawon tsayi, nisa, tsayi, kauri na yanar gizo, da kauri na flange na H-beams za su bi ka'idodi masu dacewa da buƙatun oda.
Lanƙwasa: Lanƙwasawa na H-beams zai bi ka'idodi masu dacewa da buƙatun oda. Ana iya ƙayyade wannan ta hanyar auna daidaiton ƙarshen H-beam ko amfani da ma'aunin lanƙwasa.
Karkatawa: Lanƙwasawa na H-beams zai bi ka'idodi masu dacewa da buƙatun oda. Ana iya ƙayyade wannan ta hanyar auna ma'auni na bangarorin H-beam ko amfani da ma'aunin torsion.
Rage nauyi: Nauyin H-beams zai bi ka'idodi masu dacewa da buƙatun oda. Ana iya ƙayyade wannan ta hanyar aunawa.
Haɗin Sinadari: Idan H-beams na buƙatar walda ko wasu sarrafawa, abubuwan sinadaran su za su bi ka'idodi masu dacewa da buƙatun oda.
Kayayyakin Injini: Abubuwan kayan aikin injiniya na H-beams dole ne su bi ka'idodi masu dacewa da buƙatun tsari, gami da ƙarfin juzu'i, ma'anar yawan amfanin ƙasa, da haɓakawa. Gwajin mara lalacewa: Idan H-beams na buƙatar gwaji mara lalacewa, yakamata a gudanar da shi daidai da ƙa'idodi masu dacewa da ƙayyadaddun ƙayyadaddun tsari don tabbatar da ingancinsu.
Marufi da Alama: H-beam marufi da alama ya kamata su bi ka'idodi masu dacewa da ƙayyadaddun tsari don sauƙaƙe sufuri da ajiya.
Muna ba da katako na ASTM W14x82, ASTM W30x132 katako, ASTM W30x132 katako, da kuma goyan baya.Custom W8x40 H Beam, Custom W16x89 H Beam.
A taƙaice, lokacin duba H-beams, abubuwan da ke sama ya kamata a yi la'akari da su sosai don tabbatar da cewa ingancin su ya dace da ƙa'idodi masu dacewa da ƙayyadaddun ƙayyadaddun tsari, samar da masu amfani da mafi kyawun samfuran H-beam.
APPLICATION KYAUTA
Matsayin wajeKarfe mai siffar Hana amfani da su sosai a fagen gine-gine da injiniyanci, gami da amma ba'a iyakance ga abubuwan masu zuwa ba:
Injiniyan tsarin, injiniyan gada, masana'antar injina, ginin jirgin ruwa, ginin karfen gini,
KISHIYOYI DA JIKI
Marufi da jigilar H-beams masu alamar waje gabaɗaya suna bin waɗannan matakan:
Marufi: H-beams yawanci ana tattara su bisa ga ƙayyadaddun abokin ciniki don kare saman su daga lalacewa. Hanyoyin marufi na gama gari sun haɗa da fakitin dandali, marufi na katako, da marufi na filastik. Tabbatar cewa H-beams ba su da karce da lalata yayin tattarawa.
Lakabi: A fili sanya marufi tare da bayanin samfur, kamar samfuri, ƙayyadaddun bayanai, da yawa, don sauƙin ganewa da gudanarwa.
Ana lodawa: A lokacin lodawa da sufuri, tabbatar da cewa kunshin H-beams ba su da haɗari da murkushewa don hana lalacewa.
Sufuri: Zaɓi hanyoyin sufuri masu dacewa, kamar manyan motoci ko dogo, dangane da buƙatun abokin ciniki da nisan da aka rufe.
Ana saukewa: Bayan isowa wurin da aka nufa, sauke kaya a hankali don hana lalacewar H-beams.
Ajiye: Ajiye H-beams a cikin busasshen shago, mai cike da iska don guje wa danshi da sauran illa.
KARFIN KAMFANI
FAQ
1. Ta yaya zan iya samun tsokaci daga gare ku?
Kuna iya barin mana saƙo, kuma za mu ba da amsa kowane sako cikin lokaci.
2.Za ku isar da kaya akan lokaci?
Ee, mun yi alkawarin samar da mafi kyawun samfuran inganci da bayarwa akan lokaci. Gaskiya ita ce ka'idar kamfaninmu.
3.Zan iya samun samfurori kafin oda?
Eh mana. Yawancin samfuranmu suna da kyauta, za mu iya samar da samfuran ku ko zanen fasaha.
4. Menene sharuddan biyan ku?
Lokacin biyan kuɗin mu na yau da kullun shine 30% ajiya, kuma ya rage akan B/L. EXW, FOB, CFR, CIF.
5.Shin kuna karɓar dubawar ɓangare na uku?
Eh mun yarda.
6.Ta yaya muka amince da kamfanin ku?
Mun ƙware a cikin kasuwancin karafa na tsawon shekaru a matsayin mai samar da zinare, hedkwatar hedkwata a lardin Tianjin, maraba da yin bincike ta kowace hanya, ta kowane hali.
