Babban Ingancin EN Girman Karfe Mai Siffar H
Tsarin Samar da Kayayyaki
Tsarin samarwa don daidaitaccen tsariH-biyoyinyawanci ya haɗa da waɗannan mahimman matakai:
Shiri na Kayan Danye: Yawancin lokaci kayan da ake amfani da su wajen yin H-beams ana amfani da su ne da ƙarfe. Ana tsaftace su kuma ana dumama su don shirya su don sarrafawa da samar da su daga baya.
Mai Zafi: Ana zuba billet ɗin da aka riga aka riga aka kunna a cikin injin niƙa mai zafi. A cikin injin niƙa mai zafi, ana birgima billet ɗin ta cikin birgima da yawa, a hankali suna samar da siffar giciye-sashe naH-beam.
Aiki a Sanyi (Zaɓi): A wasu lokuta, don inganta daidaito da ingancin saman H-beam, H-beams masu zafi na iya yin aiki a sanyi, kamar birgima da zane a sanyi.
Yankewa da Kammalawa: Bayan an mirgina kuma an yi aiki a sanyi, ana yanke katakon H kuma a gama su don su dace da takamaiman girma da tsayi kamar yadda abokin ciniki ya buƙata.
Maganin Fuskar Sama: Ana tsaftace hatimin H kuma ana yi musu magani da rigakafin tsatsa don tabbatar da ingancin saman da kuma juriya ga tsatsa.
Dubawa da Marufi: Ana duba ingancin H-beams ɗin da aka gama, gami da duba yanayinsu, daidaiton girma, da kuma halayen injina. Da zarar an cancanta, ana naɗe su a aika su ga abokin ciniki.
Girman Kayayyaki
| Naɗi | Unt Nauyi kg/m) | Sashe na Daidaitacce zane mm | Sashe-sashe Ama (cm²) | |||||
| W | H | B | 1 | 2 | r | A | ||
| HE28 | AA | 61.3 | 264.0 | 280.0 | 7.0 | 10.0 | 24.0 | 78.02 |
| A | 76.4 | 270.0 | 280.0 | 80 | 13.0 | 24.0 | 97.26 | |
| B | 103 | 280.0 | 280.0 | 10.5 | 18.0 | 24.0 | 131.4 | |
| M | 189 | 310.0 | 288.0 | 18.5 | 33.0 | 24.0 | 240.2 | |
| HE300 | AA | 69.8 | 283.0 | 300.0 | 7.5 | 10.5 | 27.0 | 88.91 |
| A | 88.3 | 200.0 | 300.0 | 85 | 14.0 | 27.0 | 112.5 | |
| B | 117 | 300.0 | 300.0 | 11.0 | 19.0 | 27.0 | 149.1 | |
| M | 238 | 340.0 | 310.0 | 21.0 | 39.0 | 27.0 | 303.1 | |
| HE320 | AA | 74.3 | 301.0 | 300.0 | 80 | 11.0 | 27.0 | 94.58 |
| A | 97.7 | 310.0 | 300.0 | 9.0 | 15.5 | 27.0 | 124.4 | |
| B | 127 | 320.0 | 300.0 | 11.5 | 20.5 | 27.0 | 161.3 | |
| M | 245 | 359.0 | 309.0 | 21.0 | 40.0 | 27.0 | 312.0 | |
| HE340 | AA | 78.9 | 320.0 | 300.0 | 85 | 11.5 | 27.0 | 100.5 |
| A | 105 | 330.0 | 300.0 | 9.5 | 16.5 | 27.0 | 133.5 | |
| B | 134 | 340.0 | 300.0 | 12.0 | 21.5 | 27.0 | 170.9 | |
| M | 248 | 377.0 | 309.0 | 21.0 | 40.0 | 27.0 | 315.8 | |
| HE360 | AA | 83.7 | 339.0 | 300.0 | 9.0 | t2.0 | 27.0 | 106.6 |
| A | 112 | 350.0 | 300.0 | 10.0 | 17.5 | 27.0 | 142.8 | |
| B | 142 | 360.0 | 300.0 | 12.5 | 22.5 | 27.0 | 180.6 | |
| M | 250 | 395.0 | 308.0 | 21.0 | 40.0 | 27.0 | 318.8 | |
| HE400 | AA | 92.4 | 3780 | 300.0 | 9.5 | 13.0 | 27.0 | 117.7 |
| A | 125 | 390.0 | 300.0 | 11.0 | 19.0 | 27.0 | 159.0 | |
| B | 155 | 400.0 | 300.0 | 13.5 | 24.0 | 27.0 | 197.8 | |
| M | 256 | 4320 | 307.0 | 21.0 | 40.0 | 27.0 | 325.8 | |
| HE450 | AA | 99.8 | 425.0 | 300.0 | 10.0 | 13.5 | 27.0 | 127.1 |
| A | 140 | 440.0 | 300.0 | 11.5 | 21.0 | 27.0 | 178.0 | |
| B | 171 | 450.0 | 300.0 | 14.0 | 26.0 | 27.0 | 218.0 | |
| M | 263 | 4780 | 307.0 | 21.0 | 40.0 | 27.0 | 335.4 | |
| Naɗi | Naúrar Nauyi kg/m) | Tsarin Sashe na Daidaitacce Girma (mm) | Sashen Yanki (cm²) | |||||
| W | H | B | 1 | 2 | r | A | ||
| HE50 | AA | 107 | 472.0 | 300.0 | 10.5 | 14.0 | 27.0 | 136.9 |
| A | 155 | 490.0 | 300.0 | t2.0 | 23.0 | 27.0 | 197.5 | |
| B | 187 | 500.0 | 300.0 | 14.5 | 28.0 | 27.0 | 238.6 | |
| M | 270 | 524.0 | 306.0 | 21.0 | 40.0 | 27.0 | 344.3 | |
| HE550 | AA | t20 | 522.0 | 300.0 | 11.5 | 15.0 | 27.0 | 152.8 |
| A | 166 | 540.0 | 300.0 | t2.5 | 24.0 | 27.0 | 211.8 | |
| B | 199 | 550.0 | 300.0 | 15.0 | 29.0 | 27.0 | 254.1 | |
| M | 278 | 572.0 | 306.0 | 21.0 | 40.0 | 27.0 | 354.4 | |
| HE60 | AA | t29 | 571.0 | 300.0 | t2.0 | 15.5 | 27.0 | 164.1 |
| A | 178 | 500.0 | 300.0 | 13.0 | 25.0 | 27.0 | 226.5 | |
| B | 212 | 600.0 | 300.0 | 15.5 | 30.0 | 27.0 | 270.0 | |
| M | 286 | 620.0 | 305.0 | 21.0 | 40.0 | 27.0 | 363.7 | |
| HE650 | AA | 138 | 620.0 | 300.0 | t2.5 | 16.0 | 27.0 | 175.8 |
| A | 190 | 640.0 | 300.0 | t3.5 | 26.0 | 27.0 | 241.6 | |
| B | 225 | 660.0 | 300.0 | 16.0 | 31.0 | 27.0 | 286.3 | |
| M | 293 | 668.0 | 305.0 | 21.0 | 40.0 | 27.0 | 373.7 | |
| HE700 | AA | 150 | 670.0 | 300.0 | 13.0 | 17.0 | 27.0 | 190.9 |
| A | 204 | 600.0 | 300.0 | 14.5 | 27.0 | 27.0 | 260.5 | |
| B | 241 | 700.0 | 300.0 | 17.0 | 32.0 | 27.0 | 306.4 | |
| M | 301 | 716.0 | 304.0 | 21.0 | 40.0 | 27.0 | 383.0 | |
| HE800 | AA | 172 | 770.0 | 300.0 | 14.0 | 18.0 | 30.0 | 218.5 |
| A | 224 | 790.0 | 300.0 | 15.0 | 28.0 | 30.0 | 285.8 | |
| B | 262 | 800.0 | 300.0 | 17.5 | 33.0 | 30.0 | 334.2 | |
| M | 317 | 814.0 | 303.0 | 21.0 | 40.0 | 30.0 | 404.3 | |
| HE800 | AA | 198 | 870.0 | 300.0 | 15.0 | 20.0 | 30.0 | 252.2 |
| A | 252 | 800.0 | 300.0 | 16.0 | 30.0 | 30.0 | 320.5 | |
| B | 291 | 900.0 | 300.0 | 18.5 | 35.0 | 30.0 | 371.3 | |
| M | 333 | 910.0 | 302.0 | 21.0 | 40.0 | 30.0 | 423.6 | |
| HEB1000 | AA | 222 | 970.0 | 300.0 | 16.0 | 21.0 | 30.0 | 282.2 |
| A | 272 | 0.0 | 300.0 | 16.5 | 31.0 | 30.0 | 346.8 | |
| B | 314 | 1000.0 | 300.0 | 19.0 | 36.0 | 30.0 | 400.0 | |
| M | 349 | 1008 | 302.0 | 21.0 | 40.0 | 30.0 | 444.2 | |
ENHKarfe Mai Siffa
Daraja: EN10034:1997 EN10163-3:2004
Bayani: HEA HEB da HEM
Daidaitacce: EN
SIFFOFI
Babban ƙarfi: Tsarin siffar giciye naKarfe mai siffar Hyana ba shi ƙarfin lanƙwasa mai yawa da ƙarfin ɗaukar kaya, wanda hakan ya sa ya dace da manyan gine-gine da yanayi masu nauyi.
Kwanciyar Hankali: Siffar giciye-sashe na H-beams yana ba da kyakkyawan kwanciyar hankali a ƙarƙashin matsin lamba da tashin hankali, yana ba da gudummawa ga kwanciyar hankali da aminci na tsarin.
Ginawa Mai Sauƙi: Tsarin H-beams yana sa su zama masu sauƙin haɗawa da shigarwa yayin gini, wanda ke inganta ci gaban aikin da inganci.
Amfani da Albarkatu Mai Yawa: Tsarin H-beams yana amfani da kaddarorin ƙarfe gaba ɗaya, yana rage sharar kayan aiki, kuma yana ba da gudummawa ga kiyaye albarkatu da kare muhalli.
Faɗin Amfani: H-beams sun dace da gine-gine daban-daban, gadoji, kera injina, da sauran fannoni, kuma suna da faffadan damar amfani.
Gabaɗaya, H-beams na waje suna ba da ƙarfi mai ƙarfi, kwanciyar hankali mai kyau, da sauƙin gini, wanda hakan ya sa su zama muhimmin kayan ƙarfe na gini da ake amfani da su sosai a fannoni daban-daban na injiniyanci.
DUBA KAYAYYAKI
Bukatun donKarfe mai siffar HBinciken ya ƙunshi fannoni kamar haka:
Ingancin Bayyana: Ingancin bayyanarKYAUzai bi ƙa'idodi da ƙa'idodi masu dacewa. Zafin ya zama santsi da faɗi, babu wata matsala kamar ƙuraje, ƙaiƙayi, da tsatsa.
Girman Geometric: Tsawon, faɗi, tsayi, kauri na yanar gizo, da kauri na flange na H-beams dole ne su bi ƙa'idodi da buƙatun tsari masu dacewa.
Lanƙwasawa: Lanƙwasawa na H-beams zai bi ƙa'idodi masu dacewa da buƙatun tsari. Ana iya tantance wannan ta hanyar auna daidaiton ƙarshen H-beams guda biyu ko ta amfani da ma'aunin lanƙwasawa.
Juyawa: Juyawan H-beams zai bi ƙa'idodi masu dacewa da buƙatun tsari. Ana iya tantance wannan ta hanyar auna tsayin gefuna na H-beams ko amfani da ma'aunin juyawa.
Bambancin Nauyi: Nauyin H-beams ya kamata ya bi ƙa'idodi masu dacewa da buƙatun tsari. Ana iya tantance bambancin nauyi ta hanyar aunawa.
Tsarin Sinadarai: Idan H-beams suna buƙatar walda ko wasu sarrafawa, sinadaran da ke cikinsu dole ne su bi ƙa'idodi da buƙatun tsari masu dacewa.
Halayen Inji: Halayen injina na H-beams, gami da ƙarfin tauri, wurin samar da kaya, da tsayi, dole ne su bi ƙa'idodi masu dacewa da buƙatun oda.
Gwajin da Ba Ya Lalacewa: Idan H-beams suna buƙatar gwaji mara lalatawa, ya kamata a gudanar da su bisa ga ƙa'idodi masu dacewa da ƙayyadaddun tsari don tabbatar da ingancinsu.
Marufi da Alamar: Marufi da alamar H-beam yakamata su dace da ƙa'idodi da ƙa'idodin oda masu dacewa don sauƙaƙe jigilar kaya da ajiya.
A taƙaice, ya kamata a yi la'akari da buƙatun da ke sama sosai lokacin da ake duba H-beams don tabbatar da ingancinsu ya cika ƙa'idodi da ƙayyadaddun tsari, yana ba masu amfani da samfuran H-beam mafi inganci.
AIKIN KAYAN
Ana amfani da H-beams na waje a fannonin gini da injiniyanci, gami da amma ba'a iyakance ga waɗannan fannoni ba:
Injiniyan gine-gine, injiniyan gadoji, kera injina, gina jiragen ruwa, gina tsarin ƙarfe,
MAKUNKURI DA JIRGIN SAUYA
Marufi da jigilar H-beams masu alama a waje gabaɗaya suna bin waɗannan matakan:
Marufi: Yawanci ana naɗe H-beams bisa ga ƙa'idodin abokin ciniki don kare saman su daga lalacewa. Hanyoyin marufi na yau da kullun sun haɗa da marufi mara komai, marufi na katako, da marufi na filastik. Tabbatar cewa H-beams ba su da karce ko tsatsa yayin marufi.
Lakabi: A bayyane yake sanya wa marufin suna da bayanin samfur, kamar samfuri, ƙayyadaddun bayanai, da adadi, don sauƙin ganewa da sarrafawa.
Lodawa: A lokacin lodawa da jigilar kaya, tabbatar da cewa an rufe H-beams ɗin da aka naɗe ba tare da karo ko murƙushewa ba domin hana lalacewa.
Sufuri: Zaɓi hanyoyin sufuri masu dacewa, kamar manyan motoci ko layin dogo, bisa ga buƙatun abokin ciniki da nisan da aka rufe.
Saukewa: Da zarar ka isa inda za ka sauke kayanka, a hankali za ka sauke su domin hana lalacewar hasken H.
Ajiya: A adana H-beams a cikin busasshen ma'ajiyar ajiya mai iska mai kyau domin guje wa danshi da sauran illoli.
Ƙarfin Kamfani
Tambayoyin da ake yawan yi akai-akai
1. Ta yaya zan iya samun ƙiyasin farashi daga gare ku?
Za ku iya barin mana saƙo, kuma za mu amsa kowane saƙo akan lokaci.
2. Za ku isar da kayan a kan lokaci?
Eh, mun yi alƙawarin samar da kayayyaki mafi inganci da kuma isar da su akan lokaci. Gaskiya ita ce ƙa'idar kamfaninmu.
3. Zan iya samun samfurori kafin oda?
Eh, ba shakka. Yawanci samfuranmu kyauta ne, za mu iya samar da su ta hanyar samfuranku ko zane-zanen fasaha.
4. Menene sharuɗɗan biyan kuɗin ku?
Lokacin biyan kuɗinmu na yau da kullun shine ajiya 30%, kuma sauran ya dogara da B/L.
5. Shin kuna karɓar duba na ɓangare na uku?
Eh lallai mun yarda.
6. Ta yaya muke amincewa da kamfanin ku?
Mun ƙware a harkokin kasuwancin ƙarfe tsawon shekaru a matsayinmu na masu samar da zinare, hedikwatarmu tana lardin Tianjin, muna maraba da yin bincike ta kowace hanya, ta kowace hanya.
