Sauke Sabbin Bayani da Girman Hasken EN H.
EN S235JR/S275JR/S355JR HEA HEB HEW Karfe H katako
| Kayan Aiki na Daidaitacce | EN 10025-2 S235JR / S275JR / S355JR | Ƙarfin Ba da Kyauta | S235JR ≥ 235 MPa S275JR ≥ 275 MPa S355JR ≥ 355 MPa |
| Girma | Jerin HEA / HEB / HEM HEA 100 – HEA 400 HEB 100 – HEB 400 HEM 200 - HEM 400, da sauransu. | Tsawon | Tsawon daidaitacce: mita 6 / mita 12 Tsawon da aka keɓance yana samuwa |
| Juriya Mai Girma | Ya dace da EN 10034 / EN 10365 | Takaddun Shaida Mai Inganci | Takardar Shaidar Gwaji ta EN 10204 3.1 Mill ISO 9001 Rahoton Dubawa na SGS / BV / TUV na ɓangare na uku |
| Ƙarshen Fuskar | Baƙi (zafi mai birgima) An yi amfani da galvanized mai zafi An fenti ko kuma an rufe shi da mai hana tsatsa Ana iya samun maganin farfajiya na musamman | Aikace-aikace | Tsarin ƙarfe Masana'antu masana'antu rumbunan ajiya Gine-ginen kasuwanci da na zama Gadaje da ayyukan ababen more rayuwa |
Bayanan Fasaha
EN S235JR/S275JR/S355JR
| Karfe aji | Carbon, matsakaicin % | Manganese, % | Phosphorus, matsakaicin % | Sulfur, matsakaicin % | Silicon, % |
|---|---|---|---|---|---|
| S235JR | 0.17 | ≤1.40 | 0.035 | 0.035 | ≤0.40 |
| S275JR | 0.21 | ≤1.50 | 0.035 | 0.035 | ≤0.40 |
| S355JR | 0.24 | ≤1.60 | 0.035 | 0.035 | ≤0.40 |
LURA:
Sinadarin sinadarai ya yi daidai daEN 10025-2Bukatu. Ƙananan bambance-bambance na iya faruwa dangane da kauri na sashe. Ana iya samar da abun ciki na jan ƙarfe idan an buƙata idan aka ƙayyade a cikin tsari.
EN S235JR/S275JR/S355JR HEA HEB HEW Kayan inji
| Karfe Grade | Ƙarfin tauri, ksi [MPa] | Matsakaicin ma'aunin fitarwa, ksi [MPa] | Tsawaita a cikin inci 8 [200 mm], minti % | Tsawaita a cikin inci 2 [50 mm], minti % |
|---|---|---|---|---|
| S235JR (HEA / HEB / HEM) | 52–75 [360–510] | 34 [235] | 26 | 27 |
| S275JR (HEA / HEB / HEM) | 59–82 [410–560] | 40 [275] | 22 | 23 |
| S355JR (HEA / HEB / HEM) | 68–90 [470–630] | 52 [355] | 20 | 21 |
LURA:
Kayayyakin injiniya sun yi daidai daEN 10025-2.
Ƙimar tsawaitawa na iya bambanta kaɗan dangane da kauri sashe da hanyar gwaji. Bayanan da ke sama galibi ana amfani da su ne donSassan H na HEA, HEB, da HEMAna bayar da shi don aikace-aikacen tsarin.
Jerin HEA - EN S235JR/S275JR/355JR Girma
| Girman Sashe | Tsawo (mm) | Faɗin Flange (mm) | Kauri a Yanar Gizo (mm) | Kauri na Flange (mm) |
|---|---|---|---|---|
| HEA 100 | 96 | 100 | 5.0 | 8.0 |
| HEA 200 | 190 | 200 | 6.5 | 10.0 |
| HEA 300 | 290 | 300 | 8.5 | 14.0 |
| HEA 400 | 390 | 300 | 11.0 | 19.0 |
Siffofi:
Hasken H mai sauƙi tare da kyakkyawan rabo mai ƙarfi-da-nauyi, ana amfani da shi sosai a gine-gine, firam ɗin ƙarfe, da gine-ginen masana'antu.
Jerin HEB - EN S235JR/S275JR/355JR Girma
| Girman Sashe | Tsawo (mm) | Faɗin Flange (mm) | Kauri a Yanar Gizo (mm) | Kauri na Flange (mm) |
|---|---|---|---|---|
| HEB 100 | 100 | 100 | 6.0 | 10.0 |
| HEB 200 | 200 | 200 | 9.0 | 15.0 |
| HEB 300 | 300 | 300 | 11.0 | 19.0 |
| HEB 400 | 400 | 300 | 13.0 | 21.0 |
Siffofi:
Hasken H mai matsakaicin nauyi yana ba da ƙarfin ɗaukar kaya mafi girma, wanda ya dace da ginshiƙai, gadoji, da kuma tsarin ƙarfe mai nauyi.
Jerin HEM – EN S235JR/S275JR/355JR Girma
| Girman Sashe | Tsawo (mm) | Faɗin Flange (mm) | Kauri a Yanar Gizo (mm) | Kauri na Flange (mm) |
|---|---|---|---|---|
| HEM 200 | 206 | 202 | 12.0 | 20.0 |
| HEM 300 | 306 | 305 | 15.0 | 27.0 |
| HEM 400 | 405 | 307 | 18.0 | 30.0 |
Siffofi:
Hasken H mai nauyi tare da ƙarfin matsi mai kyau, wanda aka saba amfani da shi don ginshiƙai masu tsayi, harsashin injina masu nauyi, da ayyukan ababen more rayuwa.
Danna maɓallin da ke kan dama
Fuskar Yau da Kullum
Fuskar Galvanized
Baƙin saman mai
Gine-ginen Aikin Karfe: Gilashin ƙarfe da ginshiƙai don ofisoshi masu tsayi, gine-ginen zama, cibiyoyin siyayya, da kuma babban ginin da katakon crane don rumbunan ajiya na masana'antu.
Injiniyan Gada: Babban gini da kuma ƙarƙashin gadojin manyan hanyoyi da layin dogo masu girma zuwa matsakaici.
Gine-gine na farar hula da na musamman: Har da tashoshin jirgin ƙasa na ƙarƙashin ƙasa, ƙarfafa hanyoyin shiga ramin amfani da wutar lantarki na birni, harsashin crane na hasumiya da kuma ginin gine-gine na ɗan lokaci.
Injiniyan Ƙasashen Duniya: Kayayyakinmu ƙira ne namu kuma sun cika buƙatun Dokokin Gine-gine na Kanada da sauran ƙasashen duniya don gine-ginen ƙarfe.
1) Ofishin Reshe - Tallafi a cikin Sifaniyanci, taimako tare da share kwastam, da sauransu.
2) Tan 5000 na kaya tare da girma dabam-dabam da ake da su
3) Hukumomin da ke kula da harkokin jiragen ruwa kamar CCIC, SGS, BV, TUV ne za su duba kuma su yi amfani da kayan da aka amince da su wajen sarrafa su.
Marufi Mai Kariya:
Ana amfani da tarpaulin mai nauyi don naɗe kowace bale kuma ana shafa mashin ɗin bushewa sau 2-3 don kare shi daga danshi, sannan a rufe shi da wani Layer mai hana ruwa shiga a matsayin Layer na waje.
Haɗawa:
Madaurin ƙarfe (bisa ga umarnin tashar jiragen ruwa ta Amurka) (12-16 mm) yana da kyau don ɗaukar nauyin kunshin kusan tan 2-3.
Lakabi:
Lakabin harsuna biyu (Turanci/Sifaniyanci) suna ba da bayanai kan matakin kayan aiki da ƙayyadaddun bayanai tare da lambar HS, lambar rukuni da lambar rahoton gwaji.
Girman H-Beams:
Sassan H masu girman da bai wuce ≥800 mm ba, an shafa musu mai da man hana tsatsa a masana'antu, sannan a busar da su, sannan a ƙarshe a rufe su da tawul don samar da ƙarin kariya daga tsatsa.
Kayan aiki:
Tare da ci gaba da haɗin gwiwa tare da wasu manyan layukan jigilar kaya kamar Maersk, MSC, da COSCO, isarwa na iya zama mai inganci da aminci.
Sarrafa Inganci:
Ana gudanar da tsarin marufi da jigilar kaya ta hanyar da ta dace da ISO 9001 don kiyaye amincin samfura daga masana'anta zuwa wurin aiki.
T1: Waɗanne ƙa'idodi ne H Beams ɗinku ke bi?
A: H Beams ɗinmu sun bi ka'idar EN 10025-2 don maki S235JR, S275JR, da S355JR. Haka nan za mu iya samar da takaddun shaida ga buƙatun abokin ciniki, kamar rahotannin duba EN 10204 3.1 MTC, SGS, BV, ko TUV.
Q2: Menene girman da jerin da ake samu a yau da kullun?
A: Muna samar da jerin HEA, HEB, da HEM. Girman da aka saba amfani da shi ya kama daga HEA 100 – HEA 400, HEB 100 – HEB 400, da HEM 200 – HEM 400. Tsawonsu gabaɗaya mita 6 ko mita 12 ne, tare da yankewa na musamman.
T3: Ta yaya ake tattara H Beams don fitarwa?
A: Ana naɗe fakitin da tarpaulin, ana ƙara jakunkunan busarwa guda 2-3, sannan a shafa murfin waje mai hana ruwa shiga. Manyan katakon H (tsawo ≥ 800 mm) ana shafa mai mai hana tsatsa kafin a saka su.
T4: An yi wa fakitin lakabi?
A: Eh, duk fakitin suna da lakabin Turanci da Sifaniyanci masu harsuna biyu waɗanda ke nuna matakin ƙarfe, girman sashe, lambar rukuni, lambar HS, da kuma nassoshi kan rahoton gwaji.
Q5: Shin kuna ba da tallafin share kwastam?
A: Eh, muna haɗin gwiwa da ƙwararrun dillalan kwastam don gudanar da sanarwar shigo da kaya, haraji, da sauran hanyoyin da suka shafi hakan, tare da tabbatar da isar da kaya cikin sauƙi da kuma kan lokaci.
Adireshi
Bl20, Shanghecheng, Shuangjie Street, gundumar Beichen, Tianjin, China
Imel
Waya
+86 13652091506
Rubuta saƙonka a nan ka aika mana da shi
