An yi walda da ginshiƙan H a ƙarƙashin ruwa, an yi walda da hannu a kan farantin gusset, sannan kuma an yi walda da gas ɗin co2 mai siraran bango.
GB Q235B Q345B Tsarin Karfe Ginin Tsarin Karfe
AIKACE-AIKACE
KarfeGine-gine :Ginin ƙarfe gini ne mai ɗorewa, mai ƙarfi sosai wanda ake amfani da shi sosai a ayyukan gidaje da kasuwanci.
Gidan Tsarin Karfe: Atsarin ƙarfegidagida ne na zamani, mai ɗorewa, kuma mai sauƙin muhalli wanda aka gina shi da firam ɗin ƙarfe don ƙarin ƙarfi da tsawon rai.
Karfe Structure Ma'ajiyar Kayan Ajiya: Ama'ajiyar tsarin ƙarfegini ne mai girma, mai ɗorewa, kuma mai araha wanda aka yi da firam ɗin ƙarfe, wanda ya dace da ajiya, jigilar kayayyaki, da kuma amfani da masana'antu.
Ginin Masana'antu na Ginin Karfe:A ginin masana'antu na ƙarfe tsarinwuri ne mai ɗorewa kuma mai inganci don masana'antu da amfani da masana'antu.
BAYANIN KAYAN
Core karfe tsarin kayayyakin don masana'anta gini
1. Babban tsarin ɗaukar kaya (wanda ya dace da buƙatun girgizar ƙasa na wurare masu zafi)
| Nau'in Samfuri | Kewayon Bayanai | Babban Aikin | Wuraren Daidaitawa na Tsakiyar Amurka |
| Firam ɗin Portal | W12×30 ~ W16×45 (ASTM A572 Gr.50) | Babban katako don ɗaukar nauyin rufin/bango | Lambobin girgizar ƙasa suna amfani da flanges masu ƙulli maimakon walda masu karyewa, wanda hakan ke sa su zama masu sauƙi da sauƙin jigilar su. |
| Ginshiƙin Karfe | H300×300 ~ H500×500 (ASTM A36) | Yana tallafawa nauyin firam da bene | An yi amfani da haɗin farantin tushe na girgizar ƙasa mai zafi (≥85 μm) don kare tsatsa a yanayin danshi. |
| Tashar Crane | W24×76 ~ W30×99 (ASTM A572 Gr.60) | Load-bearing don aikin crane na masana'antu | Kekunan da ke da nauyi (tan 5-20) suna da katako na ƙarshe tare da faranti masu jure yankewa. |
2. Kayayyakin tsarin rufewa (mai hana yanayi + hana lalata)
Rufin Purlins: C12×20–C16×31 (wanda aka yi amfani da shi wajen tsoma ruwan zafi) tare da nisan tsakiya na 1.5–2m ya dace da shigar da takardar ƙarfe mai launi kuma yana da ikon hana guguwar har zuwa matakin 12.
Wall Purlins: Z10×20-Z14×26 (an fentin shi da maganin hana tsatsa) tare da ramukan iska don rage cunkoso a yanayin masana'antar zafi.
Tsarin Tallafi: Ƙarfe mai ƙarfi (Φ12–Φ16 ƙarfe mai zagaye mai zafi) da kuma abin ƙarfafa kusurwa (kusurwoyin ƙarfe na L50×5) suna ƙara tauri a gefe kuma suna tabbatar da kyakkyawan aiki a ƙarƙashin iska har zuwa guguwa.
3. Tallafawa kayayyakin taimako (gyaran ginin gida)
1. Allon da aka haɗaFarantin ƙarfe mai galvanized (10-20 mm) suna da ƙarfin ɗaukar kaya daidai da aƙalla na farantin tushe na gargajiya a Tsakiyar Amurka.
2. Masu haɗawa: Ƙwararren ƙusoshin galvanized na aji 8.8 masu ƙarfi; babu buƙatar walda.
3. Rufi:Fentin fenti mai ruwa-ruwa (≥awanni 1.5) da fenti mai hana lalatawa tare da kariyar UV (rayuwarsa ≥ shekaru 10), wanda ya dace da ƙa'idodin muhalli na ƙasa.
SARRAFA TSARI NA KARFE
| Hanyar Sarrafawa | Injinan Sarrafawa | Sarrafawa |
| Yankan | Injinan yanke plasma/wutar CNC, injinan yankewa | Yanke plasma/wutar CNC (don faranti/sassan ƙarfe), yankewa (don faranti na ƙarfe masu sirara), tare da daidaiton girma mai sarrafawa |
| Ƙirƙira | Injin lanƙwasa sanyi, birki mai latsawa, injin birgima | Lanƙwasawa cikin sanyi (don C/Z purlins), lanƙwasawa (don gyaran magudanar ruwa/gyara gefen), birgima (don sandunan tallafi masu zagaye) |
| Walda | Injin walda mai nutsewa a cikin ruwa, mai walda mai baka da hannu, mai walda mai kariya daga iskar gas na CO₂ | |
| Yin rami | Injin hakowa na CNC, injin huda | An haƙa ramin CNC don ramukan ƙulli kuma an huda shi don gajerun gudu, wanda ke tabbatar da girman ramin da wurinsa. |
| Magani | Injin busar da wuta/yashi, niƙa, layin galvanizing mai zafi | Cire tsatsa (fashewar harsashi/fashewar yashi), niƙa walda (don cire burbushin), yin amfani da galvanizing mai zafi (don ƙusoshi/goyon baya) |
| Taro | Dandalin haɗawa, kayan aunawa | Kafin a haɗa kayan haɗin (ginshiƙai + sanduna + tallafi), a wargaza bayan an tabbatar da girma don jigilar kaya |
GWADA GIRMAN KARFE
| 1. Gwajin feshi na gishiri (gwajin tsatsa na asali) Ya cika ASTM B117 / ISO 11997-1 don juriya ga tsatsa a bakin teku a Tsakiyar Amurka. | 2. Gwajin mannewa Crosshatch (ISO 2409 / ASTM D3359) da Pull-off (ISO 4624 / ASTM D4541) suna tabbatar da mannewa da ƙarfin barewa. | 3. Gwajin danshi da juriyar zafi ASTM D2247 (40 °C / 95% RH) yana hana kuraje da tsagewa a lokacin ruwan sama. |
| 4. Gwajin tsufa na UV ASTM G154 yana kare shi daga faɗuwa da kuma ƙonewa daga hasken UV. | 5. Gwajin kauri na fim Ma'aunin bushewa (ASTM D7091) da Wet (ASTM D1212) suna tabbatar da kariyar tsatsa. | 6. Gwajin ƙarfin tasiri ASTM D2794 (guduma mai saukewa) yana kare rufin yayin jigilar kaya da ajiya. |
MAGANIN KAN LOKACI
Nunin Jiyya na Fuskar:Rufin da ke ɗauke da sinadarin zinc mai yawa, wanda aka yi da ƙarfe mai kauri (ƙarfin Layer mai kauri ≥85μm na iya kaiwa shekaru 15-20), mai launin baƙi, da sauransu.
Baƙin Mai
An yi galvanized
Rufin Epoxy mai cike da Zinc
MAKUNKURI DA JIRGIN SAUYA
Marufi:
An shirya tsarin ƙarfen da kyau don isar da shi lafiya: manyan sassan an naɗe su da zanen gado mai hana ruwa shiga, yayin da ƙananan sassan kuma aka haɗa su, aka yi musu lakabi, sannan aka adana su a cikin akwatunan katako don sauƙin saukewa da haɗawa.
Sufuri:
Ana iya jigilar sassan ƙarfe ta hanyar kwantenar ko jigilar kaya, tare da ɗaure manyan sassan ta amfani da madaurin ƙarfe da sandunan katako don cika ƙa'idodin isarwa.
FA'IDODINMU
1. Reshen Ƙasashen Waje da Tallafin Harshen Sifaniyanci
Muna da rassan ƙasashen waje tare daƘungiyoyin masu jin Sifaniyancidon samar da cikakken tallafin sadarwa ga abokan cinikin Latin Amurka da Turai.
Ƙungiyarmu tana taimakawashare kwastam, takardu, da kuma daidaita hanyoyin sufuri, tabbatar da isar da kayayyaki cikin sauƙi da kuma hanyoyin shigo da kayayyaki cikin sauri.
2. Kayan Haya da Aka Shirya Don Isarwa da Sauri
Muna kula da isasshenkaya na kayan tsarin ƙarfe na yau da kullun, gami da haskoki na H, haskoki na I, da kuma sassan tsarin.
Wannan yana ba da damargajerun lokutan jagoratabbatar da cewa abokan ciniki sun karɓi samfurada sauri kuma abin dogarodon ayyukan gaggawa.
3. Marufi na Ƙwararru
Duk samfuran suna cike da kayanmarufi mai dacewa da ruwa na yau da kullun- haɗa firam ɗin ƙarfe, naɗewa mai hana ruwa shiga, da kuma kariyar gefen.
Wannan yana tabbatar daaminci lodawa, kwanciyar hankali na sufuri mai nisa, kumaisowa ba tare da lalacewa baa tashar jiragen ruwa da za a kai.
4. Ingancin jigilar kaya da isarwa
Muna aiki tare da junaabokan hulɗa masu jigilar kaya masu amincikuma samar da sharuɗɗan isar da sako masu sassauƙa kamarFOB, CIF, da DDP.
Ko ta hanyarteku, layin dogo,muna bada garantinjigilar kaya akan lokacida ingantattun ayyukan bin diddigin kayayyaki.
Tambayoyin da ake yawan yi akai-akai
Dangane da Ingancin Kayan Aiki
T: Menene ma'aunin ingancin tsarin ƙarfe naka?
A: Karfenmu ya yi daidai da ƙa'idodin Amurka kamar ASTM A36 don (ƙarfe mai tsarin carbon) da ASTM A588 (ƙarfe mai jure yanayi mai tsanani ga muhalli masu tsauri).
T: Yadda ake gwada ingancin ƙarfe?
A: Muna siya daga wasu injina masu kyau kuma muna gwada duk kayan da aka karɓa, duka na sinadarai, na inji, da kuma gwaje-gwajen da ba su lalata ba (radiyo, ultrasonic, barbashi mai maganadisu da na gani) gwargwadon yadda ƙa'idodi masu dacewa suka buƙata.
Adireshi
Bl20, Shanghecheng, Shuangjie Street, gundumar Beichen, Tianjin, China
Imel
Waya
+86 13652091506
Rubuta saƙonka a nan ka aika mana da shi
