Nau'in H-type Karfe Beam Hea/heb/Ipe Type Karfe Beam Sashe Beam Turai Standard H Beam
Tsarin Samar da Kayayyaki
Tsarin samarwa don daidaitaccen tsariH-biyoyinyawanci ya haɗa da manyan matakai masu zuwa:
Shirya kayan da aka yi amfani da su: Yawancin lokaci ana amfani da kayan da ake amfani da su wajen samar da H-beams ne da ƙarfe. Waɗannan billets ɗin suna buƙatar a tsaftace su a kuma dumama su don shirya su don sarrafawa da ƙirƙirar su daga baya.
Birgima Mai Zafi: Ana zuba billet ɗin da aka riga aka riga aka kunna a cikin injin niƙa mai zafi don sarrafawa. A cikin injin niƙa mai zafi, ana birgima billet ɗin ta cikin saitin billets da yawa, a hankali suna samar da sashin giciye mai siffar H.
Aiki a cikin sanyi (zaɓi): A wasu lokuta, don inganta daidaito da ingancin saman H-beams,Hasken H mai zafi da aka birgimagudanar da ayyukan aiki na sanyi, kamar birgima a cikin sanyi ko zane.
Yankewa da Kammalawa: Bayan birgima da duk wani aiki mai sanyi, ana yanke katakon H kuma a gama su bisa ga buƙatun abokin ciniki don cika takamaiman girma da ƙayyadaddun tsayi.
Maganin saman: Ana tsaftace kuma ana yi wa H-beams magani don hana tsatsa, wanda hakan ke tabbatar da ingancin saman da kuma juriya ga tsatsa.
Dubawa da marufi: Ana duba ingancin H-beam ɗin da aka gama don ganin inganci, gami da duba gani, daidaiton girma, da kuma halayen injina. Bayan an gama duba su, ana shirya su don jigilar su ga abokin ciniki.
Girman Kayayyaki
| Naɗi | Unt Nauyi kg/m) | Sashe na Daidaitacce zane mm | Sashe-sashe Ama (cm²) | |||||
| W | H | B | 1 | 2 | r | A | ||
| HE28 | AA | 61.3 | 264.0 | 280.0 | 7.0 | 10.0 | 24.0 | 78.02 |
| A | 76.4 | 270.0 | 280.0 | 80 | 13.0 | 24.0 | 97.26 | |
| B | 103 | 280.0 | 280.0 | 10.5 | 18.0 | 24.0 | 131.4 | |
| M | 189 | 310.0 | 288.0 | 18.5 | 33.0 | 24.0 | 240.2 | |
| HE300 | AA | 69.8 | 283.0 | 300.0 | 7.5 | 10.5 | 27.0 | 88.91 |
| A | 88.3 | 200.0 | 300.0 | 85 | 14.0 | 27.0 | 112.5 | |
| B | 117 | 300.0 | 300.0 | 11.0 | 19.0 | 27.0 | 149.1 | |
| M | 238 | 340.0 | 310.0 | 21.0 | 39.0 | 27.0 | 303.1 | |
| HE320 | AA | 74.3 | 301.0 | 300.0 | 80 | 11.0 | 27.0 | 94.58 |
| A | 97.7 | 310.0 | 300.0 | 9.0 | 15.5 | 27.0 | 124.4 | |
| B | 127 | 320.0 | 300.0 | 11.5 | 20.5 | 27.0 | 161.3 | |
| M | 245 | 359.0 | 309.0 | 21.0 | 40.0 | 27.0 | 312.0 | |
| HE340 | AA | 78.9 | 320.0 | 300.0 | 85 | 11.5 | 27.0 | 100.5 |
| A | 105 | 330.0 | 300.0 | 9.5 | 16.5 | 27.0 | 133.5 | |
| B | 134 | 340.0 | 300.0 | 12.0 | 21.5 | 27.0 | 170.9 | |
| M | 248 | 377.0 | 309.0 | 21.0 | 40.0 | 27.0 | 315.8 | |
| HE360 | AA | 83.7 | 339.0 | 300.0 | 9.0 | t2.0 | 27.0 | 106.6 |
| A | 112 | 350.0 | 300.0 | 10.0 | 17.5 | 27.0 | 142.8 | |
| B | 142 | 360.0 | 300.0 | 12.5 | 22.5 | 27.0 | 180.6 | |
| M | 250 | 395.0 | 308.0 | 21.0 | 40.0 | 27.0 | 318.8 | |
| HE400 | AA | 92.4 | 3780 | 300.0 | 9.5 | 13.0 | 27.0 | 117.7 |
| A | 125 | 390.0 | 300.0 | 11.0 | 19.0 | 27.0 | 159.0 | |
| B | 155 | 400.0 | 300.0 | 13.5 | 24.0 | 27.0 | 197.8 | |
| M | 256 | 4320 | 307.0 | 21.0 | 40.0 | 27.0 | 325.8 | |
| HE450 | AA | 99.8 | 425.0 | 300.0 | 10.0 | 13.5 | 27.0 | 127.1 |
| A | 140 | 440.0 | 300.0 | 11.5 | 21.0 | 27.0 | 178.0 | |
| B | 171 | 450.0 | 300.0 | 14.0 | 26.0 | 27.0 | 218.0 | |
| M | 263 | 4780 | 307.0 | 21.0 | 40.0 | 27.0 | 335.4 | |
| Naɗi | Naúrar Nauyi kg/m) | Tsarin Sashe na Daidaitacce Girma (mm) | Sashen Yanki (cm²) | |||||
| W | H | B | 1 | 2 | r | A | ||
| HE50 | AA | 107 | 472.0 | 300.0 | 10.5 | 14.0 | 27.0 | 136.9 |
| A | 155 | 490.0 | 300.0 | t2.0 | 23.0 | 27.0 | 197.5 | |
| B | 187 | 500.0 | 300.0 | 14.5 | 28.0 | 27.0 | 238.6 | |
| M | 270 | 524.0 | 306.0 | 21.0 | 40.0 | 27.0 | 344.3 | |
| HE550 | AA | t20 | 522.0 | 300.0 | 11.5 | 15.0 | 27.0 | 152.8 |
| A | 166 | 540.0 | 300.0 | t2.5 | 24.0 | 27.0 | 211.8 | |
| B | 199 | 550.0 | 300.0 | 15.0 | 29.0 | 27.0 | 254.1 | |
| M | 278 | 572.0 | 306.0 | 21.0 | 40.0 | 27.0 | 354.4 | |
| HE60 | AA | t29 | 571.0 | 300.0 | t2.0 | 15.5 | 27.0 | 164.1 |
| A | 178 | 500.0 | 300.0 | 13.0 | 25.0 | 27.0 | 226.5 | |
| B | 212 | 600.0 | 300.0 | 15.5 | 30.0 | 27.0 | 270.0 | |
| M | 286 | 620.0 | 305.0 | 21.0 | 40.0 | 27.0 | 363.7 | |
| HE650 | AA | 138 | 620.0 | 300.0 | t2.5 | 16.0 | 27.0 | 175.8 |
| A | 190 | 640.0 | 300.0 | t3.5 | 26.0 | 27.0 | 241.6 | |
| B | 225 | 660.0 | 300.0 | 16.0 | 31.0 | 27.0 | 286.3 | |
| M | 293 | 668.0 | 305.0 | 21.0 | 40.0 | 27.0 | 373.7 | |
| HE700 | AA | 150 | 670.0 | 300.0 | 13.0 | 17.0 | 27.0 | 190.9 |
| A | 204 | 600.0 | 300.0 | 14.5 | 27.0 | 27.0 | 260.5 | |
| B | 241 | 700.0 | 300.0 | 17.0 | 32.0 | 27.0 | 306.4 | |
| M | 301 | 716.0 | 304.0 | 21.0 | 40.0 | 27.0 | 383.0 | |
| HE800 | AA | 172 | 770.0 | 300.0 | 14.0 | 18.0 | 30.0 | 218.5 |
| A | 224 | 790.0 | 300.0 | 15.0 | 28.0 | 30.0 | 285.8 | |
| B | 262 | 800.0 | 300.0 | 17.5 | 33.0 | 30.0 | 334.2 | |
| M | 317 | 814.0 | 303.0 | 21.0 | 40.0 | 30.0 | 404.3 | |
| HE800 | AA | 198 | 870.0 | 300.0 | 15.0 | 20.0 | 30.0 | 252.2 |
| A | 252 | 800.0 | 300.0 | 16.0 | 30.0 | 30.0 | 320.5 | |
| B | 291 | 900.0 | 300.0 | 18.5 | 35.0 | 30.0 | 371.3 | |
| M | 333 | 910.0 | 302.0 | 21.0 | 40.0 | 30.0 | 423.6 | |
| HEB1000 | AA | 222 | 970.0 | 300.0 | 16.0 | 21.0 | 30.0 | 282.2 |
| A | 272 | 0.0 | 300.0 | 16.5 | 31.0 | 30.0 | 346.8 | |
| B | 314 | 1000.0 | 300.0 | 19.0 | 36.0 | 30.0 | 400.0 | |
| M | 349 | 1008 | 302.0 | 21.0 | 40.0 | 30.0 | 444.2 | |
ENHKarfe Mai Siffa
Daraja: EN10034:1997 EN10163-3:2004
Bayani: HEA HEB da HEM
Daidaitacce: EN
SIFFOFI
Babban ƙarfi: An tsara siffar giciye-sashe na H-beams don samar da ƙarfin lanƙwasa mai yawa da ƙarfin ɗaukar kaya, wanda hakan ya sa su dace da manyan gine-gine da aikace-aikacen ɗaukar kaya masu nauyi.
Kyakkyawan kwanciyar hankali: Siffar giciye-sashe na H-beams yana tabbatar da kyakkyawan kwanciyar hankali a ƙarƙashin nauyin matsi da tensile, yana ba da gudummawa ga cikakken kwanciyar hankali da amincin tsarin.
Ginawa Mai Sauƙi: Tsarin H-beams yana sauƙaƙa haɗawa da shigarwa cikin sauƙi yayin gini, yana inganta ci gaban aikin da inganci.
Amfani da albarkatu sosai: Tsarin H-beams yana ba da damar amfani da kaddarorin ƙarfe yadda ya kamata, rage sharar kayan aiki da kuma ba da gudummawa ga kiyaye albarkatu da kare muhalli.
Yawaitar amfani: H-beams sun dace da tsarin gini daban-daban, gadoji, da aikace-aikacen injiniyan injiniya, suna ba da fa'ida mai yawa don amfani.
A taƙaice, al'adar H-beams tana da ƙarfi mai ƙarfi, kwanciyar hankali mai kyau, da sauƙin gini, wanda hakan ya sa su zama muhimmin kayan ƙarfe na gini da ake amfani da su sosai a fannoni daban-daban na injiniyanci.
DUBA KAYAYYAKI
Bukatun dubawa don H-beams sun haɗa da waɗannan fannoni:
Ingancin bayyanar: Ya kamata bayyanar H-beam ɗin ta cika ƙa'idodi masu dacewa da ƙayyadaddun bayanai na abokin ciniki, tare da santsi da daidaiton saman, ba tare da ɓarna, ƙagaggu, tsatsa, ko wasu lahani ba.
Girman Geometric: Tsawon, faɗi, tsayi, kauri na yanar gizo, da kauri na flange na H-beam ya kamata su dace da ƙa'idodi masu dacewa da ƙayyadaddun bayanai na abokin ciniki.
Daidaito: Daidaito na H-beam ya kamata ya dace da ƙa'idodi masu dacewa da ƙayyadaddun bayanai na abokin ciniki, wanda za a iya tabbatarwa ta hanyar auna ko ƙarshen katako biyu suna layi ɗaya ko ta amfani da ma'aunin madaidaiciya.
Juyawa: Juyawan juyawa na H-beam ya kamata ya bi ƙa'idodi masu dacewa da ƙayyadaddun bayanai na abokin ciniki, wanda za a iya tabbatarwa ta hanyar auna ko gefunan juzu'i suna tsaye ko kuma ta amfani da ma'aunin juyawa.
Juriyar Nauyi: Ya kamata nauyin H-beam ya cika ƙa'idodi masu dacewa da ƙayyadaddun bayanai na abokin ciniki, kuma ana iya tabbatar da juriyar nauyin ta hanyar aunawa.
Sinadarin sinadarai: Idan za a yi walda ko kuma a yi wasu gyare-gyare, sinadaran da ke cikinsa ya kamata su bi ƙa'idodi masu dacewa da ƙa'idodin abokin ciniki.
Kayayyakin Inji: Kayayyakin injina na H-beam yakamata su bi ƙa'idodi masu dacewa da ƙayyadaddun bayanai na abokin ciniki, gami da ƙarfin tensile, ƙarfin yawan amfanin ƙasa, tsawaitawa, da sauransu.
Gwaji mara lalatawa: Idan ana buƙatar gwajin da ba ya lalatawa ga H-beam, ya kamata a yi shi bisa ga ƙa'idodi masu dacewa da ƙayyadaddun abokan ciniki don tabbatar da ingancinsa na ciki.
Marufi da alama: Marufi da alamar H-beam ya kamata su bi ƙa'idodi masu dacewa da ƙayyadaddun bayanai na abokin ciniki don sauƙin sufuri da ajiya.
A taƙaice, lokacin da ake duba H-beams, ya kamata a yi la'akari da dukkan buƙatun da ke sama sosai don tabbatar da cewa ingancin ya cika ƙa'idodi masu dacewa da ƙayyadaddun abokan ciniki, don haka samar wa masu amfani da samfuran H-beam mafi inganci.
AIKIN KAYAN
Ana amfani da H-beams na waje a fannonin gini da injiniyanci, gami da amma ba'a iyakance ga waɗannan fannoni ba:
Injiniyan gine-gine, injiniyan gadoji, kera injina, gina jiragen ruwa, gina tsarin ƙarfe,
MAKUNKURI DA JIRGIN SAUYA
Marufi da jigilar H-beams na waje yawanci suna buƙatar bin waɗannan matakai:
Marufi:Karfe mai siffar HYawanci ana naɗe shi bisa ga buƙatun abokin ciniki don kare samansa daga lalacewa. Hanyoyin da aka saba amfani da su na marufi sun haɗa da marufi mara komai, marufi na katako, marufi na filastik, da sauransu. Lokacin marufi, ya zama dole a tabbatar da cewa saman ƙarfe mai siffar H bai yi karce ko ya lalace ba.
Lakabi: A nuna bayanan samfur a kan marufi, kamar samfuri, ƙayyadadden bayani, adadi, da sauransu, don sauƙaƙe ganowa da sarrafawa.
Lodawa: Lokacin lodawa da jigilar ƙarfe mai siffar H da aka naɗe, ya zama dole a tabbatar da cewa ba za a sami karo ko fitar da kaya ba yayin lodawa don guje wa lalacewar samfurin.
Sufuri: Zaɓi kayan aikin sufuri masu dacewa, kamar manyan motoci, jigilar jirgin ƙasa, da sauransu, sannan ka zaɓi hanyar sufuri mai dacewa bisa ga buƙatun abokin ciniki da nisan sufuri.
Saukewa: Bayan isa wurin da za a kai kayan, ana buƙatar a yi aikin sauke kayan a hankali domin guje wa lalacewar ƙarfe mai siffar H.
Ajiya: A adana ƙarfe mai siffar H a cikin busasshiyar ma'ajiyar ajiya don guje wa danshi ko wasu illoli.
Ƙarfin Kamfani
Tambayoyin da ake yawan yi akai-akai
1. Ta yaya zan iya samun ƙiyasin farashi daga gare ku?
Za ku iya barin mana saƙo, kuma za mu amsa kowane saƙo akan lokaci.
2. Za ku isar da kayan a kan lokaci?
Eh, mun yi alƙawarin samar da kayayyaki mafi inganci da kuma isar da su akan lokaci. Gaskiya ita ce ƙa'idar kamfaninmu.
3. Zan iya samun samfurori kafin oda?
Eh, ba shakka. Yawanci samfuranmu kyauta ne, za mu iya samar da su ta hanyar samfuranku ko zane-zanen fasaha.
4. Menene sharuɗɗan biyan kuɗin ku?
Lokacin biyan kuɗinmu na yau da kullun shine ajiya 30%, kuma sauran ya dogara da B/L. EXW, FOB, CFR, da CIF.
5. Shin kuna karɓar duba na ɓangare na uku?
Eh lallai mun yarda.
6. Ta yaya muke amincewa da kamfanin ku?
Mun ƙware a harkokin kasuwancin ƙarfe tsawon shekaru a matsayinmu na masu samar da zinare, hedikwatarmu tana lardin Tianjin, muna maraba da yin bincike ta kowace hanya, ta kowace hanya.
