Babban Ƙarfi ASTM A36 W4x13 Karfe I-Beam Carbon Karfe Mai Faɗi Flange Beam

Babban Ƙarfi ASTM A36 W4x13 Karfe I-Beam Carbon Karfe Mai Faɗin Flange Hoton da aka Fito

Takaitaccen Bayani:

Karfe I-beamAn kuma san shi da ƙarfe mai sassa I ko Universal Beam yana ɗaya daga cikin shahararrun kuma ana amfani da shi sosai a fannin ƙarfe mai sassa masu siffar "I". Saboda ƙarfin ɗaukar kaya mai girma, ƙarfinsa da daidaiton nauyi mai girma, da kuma daidaiton geometric, I-beams muhimmin abu ne a fannin gini da injiniyanci a duk duniya.

Wurin Asali::China

Sunan Alamar::Ƙungiyar Karfe ta Royal

Lambar Samfura::RY-H2510

Ma'aunin Kayan Aiki:ASTM

Maki:A36

Girma:W8×21 zuwa W24×104 (inci)

Tsawon:Kaya na mita 6 & 12, Tsawon da aka Musamman

Lokacin Isarwa:Kwanaki 10-25 na aiki

Lokacin Biyan Kuɗi:T/T,Western Union

Takaddun Shaida Mai Inganci:Rahoton gwaji na ɓangare na uku na EN 10204 3.1 na takardar shaidar kayan aiki da SGS/BV (gwajin lanƙwasawa da lanƙwasa)

Aika mana imel WhatsApp

Cikakken Bayani game da Samfurin

Alamun Samfura

Gabatarwar Samfuri

Kadara	Bayani / Cikakkun bayanai
Kayan Aiki na Daidaitacce	ASTM A36 (tsarin gabaɗaya)
Ƙarfin Ba da Kyauta	≥250 MPa (36 ksi); Ƙarfin tauri ≥420 MPa
Girma	W8×21 zuwa W24×104 (inci)
Tsawon	Kaya: mita 6 & mita 12; Tsawon da aka keɓance yana samuwa
Juriya Mai Girma	Ya yi daidai da GB/T 11263 ko ASTM A6
Takaddun Shaida Mai Inganci	EN 10204 3.1; Gwaji na ɓangare na uku na SGS/BV (taurin kai da lanƙwasawa)
Ƙarshen Fuskar	Za a iya yin fenti mai zafi, fenti, da sauransu; ana iya gyara shi yadda ya kamata.
Aikace-aikace	Gine-gine, gadoji, gine-ginen masana'antu, jiragen ruwa da sufuri
Daidaiton Carbon (Ceq)	≤0.45% (yana tabbatar da ingantaccen walda); Lambar walda ta AWS D1.1 ta dace
Ingancin Fuskar	Babu tsagewa, tabo, ko naɗewa da za a iya gani; lanƙwasa ≤2 mm/m; lanƙwasa gefen ≤1°

SAMU ƘARIN BAYANI

Kadarar injina

Kadara	Ƙayyadewa	Bayanin da aka Sauƙaƙa
Ƙarfin Ba da Kyauta	≥250 MPa (36 ksi)	Matakin damuwa wanda nakasa ta dindindin ke farawa
Ƙarfin Taurin Kai	400–550 MPa (58–80 ksi)	Matsakaicin matsin lamba kafin karyewa
Ƙarawa	≥20%	An auna ƙarfin juyi sama da tsawon ma'aunin mm 200
Taurin kai (Brinell)	119–159 HB	Darajar tunani don taurin kayan abu
Carbon (C)	≤0.26%	Yana tasiri ƙarfi da sauƙin walda
Manganese (Mn)	0.60–1.20%	Yana inganta ƙarfi da tauri
Sulfur (S)	≤0.05%	Ana sarrafa shi don kiyaye tauri
Phosphorus (P)	≤0.04%	Iyakance don haɓaka tauri
Silikon (Si)	≤0.40%	Yana ƙara ƙarfi kuma yana tallafawa deoxidation

Girman

Siffa	Zurfi (in)	Faɗin Flange (in)	Kauri a Yanar Gizo (in)	Kauri na flange (in)	Nauyi (lb/ft)
W4×13	4.16	4.06	0.28	0.345	13
W8×21 (Girman da ake da su)	8.06	8.03	0.23	0.36	21
W8×24	8.06	8.03	0.26	0.44	24
W10×26	10.02	6.75	0.23	0.38	26
W10×30	10.05	6.75	0.28	0.44	30
W12×35	12.00	8.00	0.26	0.44	35
W12×40	12.00	8.00	0.30	0.50	40
W14×43	14.02	10.02	0.26	0.44	43
W14×48	14.02	10.03	0.30	0.50	48
W16×50	16.00	10.03	0.28	0.50	50
W16×57	16.00	10.03	0.30	0.56	57
W18×60	18.00	11.02	0.30	0.56	60
W18×64	18.00	11.03	0.32	0.62	64
W21×68	21.00	12.00	0.30	0.62	68
W21×76	21.00	12.00	0.34	0.69	76
W24×84	24.00	12.00	0.34	0.75	84
W24×104 (Girman da ake da su)	24.00	12.00	0.40	0.88	104

Teburin Kwatanta Girma da Juriya

Sigogi	Matsakaicin Nisa	Juriyar ASTM A6/A6M	Bayanan da aka Sauƙaƙa
Zurfi (H)	100–600 mm (4"–24")	±3 mm (±1/8")	A cikin iyakokin girman da ba a san su ba
Faɗin Flange (B)	100–250 mm (4"–10")	±3 mm (±1/8")	Faɗi mai daidaito don daidaiton kaya
Kauri a Yanar Gizo (tₙ)	4–13 mm	±10% ko ±1 mm (ƙima mafi girma)	Tasirin ƙarfin yankewa
Kauri na Flange (t_f)	6–20 mm	±10% ko ±1 mm (ƙima mafi girma)	Babban abin da ke haifar da ƙarfin lanƙwasawa
Tsawon (L)	Daidaitaccen mita 6-12; har zuwa mita 18 na musamman	+50 / 0 mm	Babu haƙuri mara kyau
Daidaito	—	L / 1000	Iyaka katako mai ƙarfi
Murabba'in Flange	—	≤4% na faɗin flange	Tabbatar da daidaito da daidaito
Juyawar	—	≤4 mm/m	Yana sarrafa karkacewar juyawa

Ƙarshen Fuskar

Baƙi Mai Zafi: Yanayin yau da kullun

Gilashin da aka tsoma a cikin ruwan zafi: ≥85μm (ya yi daidai da ASTM A123), gwajin fesa gishiri ≥500h

Rufi: An fesa fenti mai ruwa daidai gwargwado a saman katakon ƙarfe ta amfani da bindigar fesawa ta iska.

Abubuwan da aka keɓance na Musamman

Nau'in Keɓancewa	Zaɓuɓɓuka	Bayani	Matsakaicin kudin shiga (MOQ)	Lokacin Gabatarwa na Yau da Kullum	Dubawa
Girma	H, B, tₙ, t_f, L	Girman da aka saba ko na musamman; an yanke shi zuwa tsayi	Tan 20	Kwanaki 7–15	Duba girma, haƙurin tsayi
Maganin Fuskar	Baƙi, mai fashewa, mai, fenti/epoxy, galvanizing	Kariyar lalata	Tan 20	Kwanaki 10–20	Yanayin saman, kauri na shafi
Sarrafawa	Hakowa, yankan, beveling, walda, pre-ƙirƙira	Ƙirƙira a kowane zane	Tan 20	Kwanaki 15–30	Daidaiton zane, ingancin walda
Alamar & Marufi	Alamar musamman, haɗa kaya, kariyar ƙarshe, shiryawa mai hana ruwa	Shiryawa a shirye don fitarwa	Tan 20	Kwanaki 3–7	Sahihancin shiryawa, daidaiton alama

Babban Aikace-aikacen

aikace-aikacen astm-a992-a572-h-beam-application-royal-steel-group-3

Gine-ginen Gine-gine: Ginshiƙai da ginshiƙai na manyan gine-gine, masana'antu, rumbunan ajiya, da gadoji, waɗanda ke ba da babban tallafi na ɗaukar kaya.

Injiniyan Gada: Manyan ko na biyu na gadoji na ababen hawa da na masu tafiya a ƙasa.

aikace-aikacen astm-a992-a572-h-beam-application-royal-steel-group-4

Kayan Aiki Masu Kyau & Tallafin Masana'antuTallafi ga manyan injuna da dandamalin masana'antu.

Ƙarfafa Tsarin: Ƙarfafawa ko gyara tsarin da ake da shi don inganta juriyar ɗaukar kaya da lanƙwasawa.

Ribar Kamfanin Royal Steel (Me Yasa Kamfanin Royal Ya Fi Kyau Ga Abokan Ciniki Na Amurka?)

1) Ofishin Reshe - Tallafi a cikin Sifaniyanci, taimako tare da hanyoyin kwastam, da sauransu.

2) Sama da tan 5,000 na kaya a hannun jari, tare da nau'ikan girma dabam-dabam

3) Hukumomi masu iko kamar CCIC, SGS, BV, da TUV sun yi nazari a kai, tare da marufi na yau da kullun da ya dace da ruwa.

Shiryawa da Isarwa

shiryawa

Isarwa cikin aminci daga nesa yana da mahimmanci. Hanyoyin shiryawa na yau da kullun sune:

An ɗaure shi da ƙarfe: An cika sandunan I sosai kuma an ɗaure su da madauri don riƙe su a wurinsu.

Tallafi / Tubalan Itace: Tsakanin yadudduka don kwanciyar hankali da kuma hana lanƙwasawa.

Hulunan Kariya na Ƙarshe: Ana kare ƙarshen katako daga lalacewa yayin da ake sarrafa shi.

Rigakafin Tsatsa: An shafa mai ko an shafa shi don kare shi daga danshi da tsatsa don jigilar kaya zuwa teku ko jigilar kaya na dogon lokaci.

Isarwa

Muna samar da mafita mai sauƙin isarwa don dacewa da buƙatun jigilar kayayyaki na ƙasashen waje da na cikin gida daban-daban:

Jigilar Tashar Jiragen Ruwa zuwa Tashar Jiragen Ruwa: Ɗaukar akwati lafiya da kuma tsarewa don jigilar kaya zuwa ƙasashen waje.

Sufurin Manyan Motoci: Ana isar da kaya zuwa wurin ginin gida na yau da kullun.

Ayyukan Jigilar Aiki bisa Aiki: Gudanar da girma/tsawo da yawa na katako don shigar da wurin da aka tsara.

Lokacin Jagora: Ana iya samar da oda na I-Beam Standard I-Beams da aka adana a cikin ma'ajiyar kayan cikin kwanaki 7-15, kuma ana iya samar da girma dabam dabam.

Maganin Sufuri na Kasuwar Amurka: Ana jigilar katakon ASTM zuwa Amurka ta hanyar jigilar kaya ta teku kuma an ɗaure su da madaurin ƙarfe, kariya ta ƙarshe da kuma murfin hana tsatsa don isar da kaya cikin aminci da inganci.

Tambayoyin da ake yawan yi akai-akai

T: Wadanne ka'idoji ne I-Beams ɗinku suka cika don Tsakiyar Amurka?
A:I-Beams ɗinmu sun bi ka'idojinASTM A36 & A572 Grade 50, wanda aka saba amfani da shi a Tsakiyar Amurka. Haka kuma za mu iya samar da kayayyaki da suka dace da ƙa'idodin gida, misali,NOM na Mexico.

T: Menene lokacin isar da kaya zuwa Panama?
A:Jirgin ruwa daga tashar jiragen ruwa ta Tianjin zuwa yankin ciniki na 'yanci na Colon yana ɗaukar kaya daga tashar jiragen ruwa ta Tianjin zuwa yankin ciniki na 'yanci na Colon.Kwanaki 28–32Jimlar lokacin samarwa da isarwa shineKwanaki 45–60Ana iya shirya jigilar kaya cikin gaggawa.

T: Shin kuna taimakawa wajen share kwastam?
A:Eh, ƙwararrun dillalanmu suna kula da sanarwar kwastam, haraji, da duk takardu don tabbatar da isar da kayayyaki cikin sauƙi.

T: Waɗanne hanyoyin tattarawa ake amfani da su don I-Beams?
A:Ana ɗaure sandunan da madaurin ƙarfe, an kare su da tubalan katako da murfi na ƙarshe, sannan a shafa musu mai, a fenti, ko a naɗe su don jigilar su ta teku.