ASTM A36 IPE/IPN Beam | Mai Kaya na I Beam na China | Gine-gine na Karfe

ASTM A36 IPE/IPN Beam | Mai Kaya na I Beam China | Fitaccen Hoton Karfe na Tsarin Gine-gine

Takaitaccen Bayani:

Nau'in strut mai inganciƙarfe I katakoAn ƙera shi bisa ga ƙa'idar ASTM A36. Ya dace da amfani a gine-gine, masana'antu da ayyukan ababen more rayuwa, wannan I Beam yana ba da kyakkyawan ƙarfin ɗaukar kaya tare da kyakkyawan ƙarfin walda da dorewa. Ana samunsa a girma da tsayi daban-daban, ana amfani da su sosai a fannoni daban-daban na injiniya.

Wurin Asali::China

Sunan Alamar::Ƙungiyar Karfe ta Royal

Lambar Samfura::RY-H2510

Girma:W8×21 zuwa W24×104 (inci)

Tsawon:Kaya na mita 6 & 12, Tsawon da aka Musamman

Lokacin Isarwa:Kwanaki 10-25 na aiki

Lokacin Biyan Kuɗi:T/T,Western Union

Takaddun Shaida Mai Inganci:Rahoton gwaji na ɓangare na uku na EN 10204 3.1 na takardar shaidar kayan aiki da SGS/BV (gwajin lanƙwasawa da lanƙwasa)

Aika mana imel WhatsApp

Cikakken Bayani game da Samfurin

Alamun Samfura

Gabatarwar Samfuri

Kadara	Bayani / Cikakkun bayanai
Kayan Aiki na Daidaitacce	ASTM A36 (tsarin gabaɗaya)
Ƙarfin Ba da Kyauta	≥250 MPa (36 ksi); Ƙarfin tauri ≥420 MPa
Girma	W8×21 zuwa W24×104 (inci)
Tsawon	Kaya: mita 6 & mita 12; Tsawon da aka keɓance yana samuwa
Juriya Mai Girma	Ya yi daidai da GB/T 11263 ko ASTM A6
Takaddun Shaida Mai Inganci	EN 10204 3.1; Gwaji na ɓangare na uku na SGS/BV (taurin kai da lanƙwasawa)
Ƙarshen Fuskar	Za a iya yin fenti mai zafi, fenti, da sauransu; ana iya gyara shi yadda ya kamata.
Aikace-aikace	Gine-gine, gadoji, gine-ginen masana'antu, jiragen ruwa da sufuri

SAMU ƘARIN BAYANI

Sinadaran da Abubuwan Inji

Kadara / Sinadarin	darajar
C (Kabon)	≤ 0.25%
Mn (Manganese)	0.80–1.20%
P (Fosphorus)	≤ 0.04%
S (Silfur)	≤ 0.05%
Si (Silikon)	≤ 0.40%
Ƙarfin Ba da Kyauta	250 MPa
Ƙarfin Taurin Kai	400–550 MPa
Ƙarawa	kashi 20%

Girman

Girman	Nauyi (kg/m)	H (mm)	B (mm)	T (mm)
I 100 × 68	11.26	100	68	4.5
I 120 × 74	13.99	120	74	5.0
I 126 × 74	14.22	126	74	5.0
I 140 × 80	16.89	140	80	5.5
I 160 × 88	20.52	160	88	3.0
I 180 × 94	24.14	180	94	6.5
I 200 × 100	27.93	200	100	7.0
I 200 × 100	31.07	200	100	9.0
I 200 × 100	33.07	200	100	7.5
I 220 × 110	36.53	220	110	9.5
I 240 × 116	37.48	240	116	8.0
I 240 × 118	41.25	240	118	10.0
I 250 × 116	38.11	250	116	8.0
I 250 × 118	42.03	250	118	10.0
I 270 × 122	42.83	270	122	8.5

Shirya don gano ƙarin girma dabam dabam?

Sauke cikakken jadawalin girman I Beam!

DANNA NAN

Teburin Kwatanta Girma da Juriya

Sigogi	Matsakaicin Nisa	Juriyar ASTM A6/A6M	Bayanan da aka Sauƙaƙa
Zurfi (H)	100–600 mm (4"–24")	±3 mm (±1/8")	A cikin iyakokin girman da ba a san su ba
Faɗin Flange (B)	100–250 mm (4"–10")	±3 mm (±1/8")	Faɗi mai daidaito don daidaiton kaya
Kauri a Yanar Gizo (tₙ)	4–13 mm	±10% ko ±1 mm (ƙima mafi girma)	Tasirin ƙarfin yankewa
Kauri na Flange (t_f)	6–20 mm	±10% ko ±1 mm (ƙima mafi girma)	Babban abin da ke haifar da ƙarfin lanƙwasawa
Tsawon (L)	Daidaitaccen mita 6-12; har zuwa mita 18 na musamman	+50 / 0 mm	Babu haƙuri mara kyau
Daidaito	—	L / 1000	Iyaka katako mai ƙarfi
Murabba'in Flange	—	≤4% na faɗin flange	Tabbatar da daidaito da daidaito
Juyawar	—	≤4 mm/m	Yana sarrafa karkacewar juyawa

Ƙarshen Fuskar

Baƙi Mai Zafi: Yanayin yau da kullun

Gilashin da aka tsoma a cikin ruwan zafi: ≥85μm (ya yi daidai da ASTM A123), gwajin fesa gishiri ≥500h

Rufi: An fesa fenti mai ruwa daidai gwargwado a saman katakon ƙarfe ta amfani da bindigar fesawa ta iska.

Abubuwan da aka keɓance na Musamman

Nau'i	Zaɓuɓɓuka	Bayani	Matsakaicin kudin shiga (MOQ)	Lokacin Gabatarwa	Dubawa
Girma	H, B, tₙ, t_f, L	Girman yau da kullun ko na musamman	Tan 20	Kwanaki 7–15	Girma, haƙurin tsayi
saman	Baƙi, mai fashewa, mai, fenti/epoxy, galvanizing	Kariyar lalata	Tan 20	Kwanaki 10–20	Yanayin saman, kauri na shafi
Sarrafawa	Hakowa, yankan, beveling, walda, pre-ƙirƙira	Ƙirƙira a kowane zane	Tan 20	Kwanaki 15–30	Duba zane da walda
Alamar & Marufi	Alamar musamman, haɗa kaya, kariyar ƙarshe, hana ruwa shiga	A shirye a fitar da kaya	Tan 20	Kwanaki 3–7	Sahihancin shiryawa da alama

Babban Aikace-aikacen

Gine-ginen Gine-gine: Gilashi da ginshiƙai a cikin manyan gine-gine, masana'antu, rumbunan ajiya, da gadoji, suna ba da babban tallafi na ɗaukar kaya.

Injiniyan Gada: Manyan ko na biyu na gadojin ababen hawa da na masu tafiya a ƙasa.

Kayan Aiki Masu Nauyi da Tallafin Masana'antu: Tsarin tallafi ga manyan injuna da dandamalin masana'antu.

Ƙarfafa Tsarin: Ƙarfafawa ko gyara tsarin da ake da shi don inganta ƙarfin ɗaukar nauyinsu da ƙarfin lanƙwasawa.

aikace-aikacen astm-a992-a572-h-beam-application-royal-steel-group-3

aikace-aikacen astm-a992-a572-h-beam-application-royal-steel-group-4

Ribar Kamfanin Royal Steel (Me Yasa Kamfanin Royal Ya Fi Kyau Ga Abokan Ciniki Na Amurka?)

1) Ofishin Reshe - Tallafi a cikin Sifaniyanci, taimako tare da hanyoyin kwastam, da sauransu.

2) Kimanin tan 5,000 na kaya a hannun jari, tare da nau'ikan girma dabam-dabam

3) Hukumomi masu iko kamar CCIC, SGS, BV, da TUV sun yi nazari a kai.

Shiryawa da Isarwa

An shirya I-Beams ɗinmu cikin aminci kuma an kare su don jigilar kaya: an ɗaure ƙarfe, an tallafa musu da tubalan katako kuma an sanya musu murfin kariya. Ana yin aikin hana tsatsa don jigilar kaya ta teku ko ta dogon zango. Muna ba da sabis na jigilar kaya iri-iri kamar tashar jiragen ruwa zuwa tashar jiragen ruwa, jigilar manyan motoci da jigilar ayyuka. Kuna iya tsammanin karɓar I Beam ɗinku daga hannun jari cikin kwanaki 7-15, ana kuma maraba da girman da aka keɓance. Ga kasuwar Amurka, galibi ana jigilar ASTM I-Beam ta cikin akwati tare da ɗaure ƙarfe, kariya ta ƙarshe da rufin hana tsatsa don isarwa mai aminci da tsabta.

Tambayoyin da ake yawan yi akai-akai

T: Menene takamaiman abubuwan da ke cikin I-Beams ɗinku don Tsakiyar Amurka?
A: Na'urorinmu na I-beams sune ASTM A36 da A572 Grade 50 waɗanda ake iya siyar da su a CentralAmerica. Haka kuma za mu iya samar da kayayyaki masu dacewa da ƙa'idodin gida kamar Mexico NOM.

T: Har yaushe ne lokacin isar da kaya zuwa Panama?
A: Jirgin ruwa daga tashar jiragen ruwa ta Tianjin zuwa yankin ciniki na 'yanci na Colon yana ɗaukar kwanaki 28 zuwa 32. Jimillar lokacin samarwa da isarwa shine kwanaki 45 zuwa 60. Za mu iya shirya jigilar kaya cikin gaggawa.

T: Za ku iya taimaka mana da share kwastam?
A: Eh, ƙwararrun dillalanmu da ke aiki a ko'ina suna kula da sanarwar kwastam, haraji, da duk takardu don tabbatar da cewa an isar da su cikin sauƙi.

T: Waɗanne hanyoyi ne ake amfani da su wajen shirya I-Beams?
A: An ɗaure sandunan da madaurin ƙarfe, an kare su da tubalan katako da murfi na ƙarshe, sannan an rufe su da mai, an fenti su ko an naɗe su da fim don jigilar su ta teku.