Bayanan Tsarin Karfe na Turai EN S355JR I beam
| Kadara | Bayani / Cikakkun bayanai |
|---|---|
| Daidaitacce | EN S355JR |
| Ƙarfin Ba da Kyauta | ≥355 MPa; Ƙarfin Tashin Hankali 470–630 MPa |
| Girma | IPE 80–IPE 600 / IPN 80–IPN 550 |
| Tsawon | Daidaitacce: mita 6 / mita 12; Tsawon da aka keɓance har zuwa mita 24 yana samuwa |
| Juriya Mai Girma | Ya yi daidai da EN 10034 don sassan tsarin I masu zafi-birgima |
| Takaddun Shaida Mai Inganci | EN 10204 3.1 / 3.2; Ana iya duba SGS, BV, TUV ta hanyar amfani da na'urori masu auna sigina na ɓangare na uku |
| Ƙarshen Fuskar | Baƙar ƙarfe, galvanizing mai zafi, shafi mai amfani da epoxy, SA2.5 mai fashewa da yashi |
| Aikace-aikace | Gine-gine masu ɗauke da kaya masu nauyi, rumbunan ajiya, gine-ginen masana'antu, gadoji, cranes, da tsarin injina |
| Daidaiton Carbon (Ceq) | ≤0.47% (yana tabbatar da ingantaccen walda a ƙarƙashin hanyoyin walda na EN & AWS) |
| Ingancin Fuskar | Sama mai santsi ba ta da tsatsa, tsatsa, da laminations; juriyar madaidaiciya ≤2 mm/m |
| Kadara | Ƙayyadewa | Bayani |
|---|---|---|
| Ƙarfin Ba da Kyauta | ≥355 MPa | Matakin damuwa wanda nakasa ta dindindin ke farawa |
| Ƙarfin Taurin Kai | 470–630 MPa | Matsakaicin nauyin tensile da ƙarfe zai iya jurewa kafin karyewa |
| Ƙarawa | ≥22% | Adadin nakasar filastik kafin karyewa, an auna shi akan tsawon ma'aunin da aka saba |
| Taurin kai (Brinell) | 140–180 HB | Matsakaicin taurin kewayon ƙarfe na tsarin S355JR |
| Carbon (C) | ≤0.22% | Yana kula da walda da tauri a matakan ƙarfi mafi girma |
| Manganese (Mn) | 1.00–1.70% | Yana ƙara ƙarfi, tauri, da juriya ga tasiri |
| Sulfur (S) | ≤0.035% | Ƙarancin sulfur yana inganta sassauci kuma yana hana karyewa |
| Phosphorus (P) | ≤0.035% | Ƙarancin phosphorus yana ƙara tauri da ingancin walda |
| Silikon (Si) | ≤0.55% | Yana ƙara ƙarfi kuma yana aiki azaman deoxidizer a cikin aikin ƙarfe |
EN S355JR Karfe Beam - Girman IPE
| Abu | Nauyi (kg/m) | Zurfin (mm) | Faɗi (mm) | Kauri a Yanar Gizo (mm) | Kauri na Flange (mm) |
|---|---|---|---|---|---|
| IPE 80 | 6.0 | 80 | 46 | 3.8 | 5.2 |
| IPE 100 | 8.1 | 100 | 55 | 4.1 | 5.7 |
| IPE 120 | 10.4 | 120 | 64 | 4.4 | 6.3 |
| IPE 140 | 12.9 | 140 | 73 | 4.7 | 6.9 |
| IPE 160 | 15.8 | 160 | 82 | 5.0 | 7.4 |
| IPE 180 | 18.8 | 180 | 91 | 5.3 | 8.0 |
| IPE 200 | 22.4 | 200 | 100 | 5.6 | 8.5 |
| IPE 220 | 26.2 | 220 | 110 | 5.9 | 9.2 |
| IPE 240 | 30.7 | 240 | 120 | 6.2 | 9.8 |
| IPE 270 | 36.1 | 270 | 135 | 6.6 | 10.2 |
| IPE 300 | 42.2 | 300 | 150 | 7.1 | 10.7 |
| IPE 330 | 49.1 | 330 | 160 | 7.5 | 11.5 |
| IPE 360 | 57.1 | 360 | 170 | 8.0 | 12.7 |
| IPE 400 | 66.3 | 400 | 180 | 8.6 | 13.6 |
| IPE 450 | 79.1 | 450 | 190 | 9.4 | 14.6 |
| IPE 500 | 90.7 | 500 | 200 | 10.2 | 16.0 |
| IPE 550 | 106.0 | 550 | 210 | 11.2 | 17.2 |
| IPE 600 | 124.4 | 600 | 220 | 12.0 | 19.0 |
EN S355JR Karfe Beam - Girman IPN
| Abu | Nauyi (kg/m) | Zurfin (mm) | Faɗi (mm) | Kauri a Yanar Gizo (mm) | Kauri na Flange (mm) |
|---|---|---|---|---|---|
| IPN 80 | 5.9 | 80 | 42 | 3.9 | 5.9 |
| IPN 100 | 8.3 | 100 | 50 | 4.5 | 6.8 |
| IPN 120 | 11.1 | 120 | 58 | 5.1 | 7.7 |
| IPN 140 | 14.3 | 140 | 66 | 5.7 | 8.6 |
| IPN 160 | 17.9 | 160 | 74 | 6.3 | 9.5 |
| IPN 180 | 21.9 | 180 | 82 | 6.9 | 10.4 |
| IPN 200 | 26.2 | 200 | 90 | 7.5 | 11.3 |
| IPN 220 | 31.1 | 220 | 98 | 8.1 | 12.2 |
| IPN 240 | 36.2 | 240 | 106 | 8.7 | 13.1 |
| IPN 260 | 41.9 | 260 | 113 | 9.4 | 14.1 |
| IPN 280 | 47.9 | 280 | 119 | 10.1 | 15.2 |
| IPN 300 | 54.2 | 300 | 125 | 10.8 | 16.2 |
| IPN 320 | 61.0 | 320 | 131 | 11.5 | 17.3 |
| IPN 340 | 68.0 | 340 | 137 | 12.2 | 18.3 |
| IPN 360 | 76.1 | 360 | 143 | 13.0 | 19.5 |
Baƙi Mai Zafi Mai Birgima
Galvanizing mai zafi
Shafi
Tsarin Gine-gine: katako da ginshiƙai na gine-gine masu hawa da yawa, masana'antu, rumbunan ajiya da gadoji waɗanda ke aiki a matsayin manyan mambobi masu ɗaukar kaya.
Injiniyan Gada: Manyan ko manyan katako na biyu don gadoji na hanya da na ƙafa.
Kayan Aiki Masu Kyau & Tallafin Masana'antu: Ana ƙarfafa manyan injuna da dandamalin masana'antu ta hanyar tallafi.
Ƙarfafa Tsarin: Gyara ko sake gyara gini ko gini wanda ke ƙara ƙarfinsa na ɗaukar manyan kaya ko lokutan aiki.
Tsarin Gine-gine
Injiniyan Gada
Tallafin Kayan Aikin Masana'antu
Ƙarfafa Tsarin
1) Tallafin da ake bayarwa ga masu magana da Sifaniyanci, taimakon share kwastam, da sauransu.
2) Sama da tan 5,000 na kaya a hannun jari, tare da nau'ikan girma dabam-dabam
3) Ƙungiyoyi masu iko kamar CCIC, SGS, BV, da TUV sun duba su
shiryawa
Cikakken Kariya: Tabarmar da kuma guda 2 zuwa 3 na kayan da za a iya amfani da su wajen yin amfani da I-beams; Tabarmar da ke rufe zafi, wadda ba ta hana ruwa shiga cikin I-beams.
Haɗa tsaro: Ga kowane fakitin, an naɗe shi da madaurin ƙarfe mai tsawon mm 12 - 16, wanda ya isa tan 2-3 kuma yana da kayan ɗagawa masu dacewa da mu.
Kyakkyawan LakabiLakabi masu harsuna biyu (Turanci da Sifaniyanci) waɗanda suka haɗa da lambar maki, ƙayyadaddun bayanai da lambar HS, lambar Rukunin da kuma nuni ga gwajin.
Kariyar Babban Bayani: I radius ≥800 mm tare da wani Layer na man daidaitawa da kuma tarpaulin sau biyu.
Isarwa
Jigilar Kaya Mai Aminci: Mafi kyawun Haɗin gwiwar Masu Jiragen Ruwa don Jirgin Ruwa Mai Tsaro (MSK, MSC, COSCO da sauransu).
Sarrafa Inganci: Hasken ba ya ƙura kuma za ku iya amincewa za su isa daidai, ma'ana kuna da aikin da ba shi da damuwa.
T: Waɗanne ƙa'idodi ne I beam ɗinku ke bi a tsakiyar Amurka?
A: I beam ɗinmu sun yi daidai da ASTM A36&A572 Grade 50 wanda aka karɓa a tsakiyar Amurka. Haka kuma za mu iya samar da samfuran da suka dace da ƙa'idodin ƙasa (kamar MEXICO NOM) ko makamancin haka.
T: Tsawon wane lokaci ake ɗauka kafin a kawo kaya zuwa Panama?
A: Lokacin Sufuri Jirgin Ruwa daga Tashar Jirgin Ruwa ta Tianjin zuwa Yankin Ciniki Mai 'Yanci na Kwalba Kwanaki 28-32. Kwanaki 45-60 don kerawa da isarwa. Ana kuma samun jigilar gaggawa.
T: Kuna da izinin kwastam?
A: Tabbas, dillalanmu na ƙwararru za su yi sanarwar kwastam, biyan haraji da duk takardun aiki, isar da kaya zai kasance cikin sauƙi.
Adireshi
Bl20, Shanghecheng, Shuangjie Street, gundumar Beichen, Tianjin, China
Imel
Waya
+86 13652091506
