Neman ƙarin girma dabam-dabam na ƙarfe mai ƙarfin C-channel da aka yi da hot-dimmed.
ASTM A36 41×21 41×41 41×62 Mai Zafi Mai Rarraba Tashar Strut Mai Rarrabawa
Bayanin Samfuri
Kamfanin Royal Steel Group ne ke da alhakintashar c tashar ƙarfe mai samar da kayayyaki da ake amfani da suTsarin hawa panel na hasken rana, maƙallan tallafi na pv, kumaaikace-aikacen tsarin photovoltaicAn gina shi da tsarin bayanin martaba na yau da kullun, tashar tana ba da tallafi mai inganci kuma tana ba da damar hawa da daidaitawa mai sassauƙa.
Tashar Cza a iya gamawaan riga an yi amfani da galvanized, tsoma mai zafi da aka galvanized, musamman, yana da kyau a yi amfani da shi a cikin gida da waje don aikin hasken rana.
Cikakken Bayani game da Samfurin
| Abu | Cikakkun bayanai |
| Sunan Samfuri | C Channel Karfe |
| Nau'i | Tashar Strut / C Channel / Tashar Unistrut |
| Girman | 41 × 21 mm/41 × 41 mm/41 × 62 mm/41 × 82 mm |
| Kayan Aiki | Karfe Mai Kauri |
| Maki na gama gari | A36 |
| saman | HDG / An riga an yi galvanized / An keɓance shi |
| Kauri | An keɓance |
| Tsawon | Daidaitacce ko Musamman |
| Ramin/Rami | An yi rami ko kuma an yi rami a ƙasa |
| Aikace-aikace | Tsarin Hawan Rana, Tallafin PV, Tsarin Karfe |
| Sarrafawa | Yankan, Huda, Hakowa, Galvanizing |
MUHIMMAN ABUBUWA
1. Shigarwa Mai Sauƙi
Ramin da aka yi ramin yana sauƙaƙa daidaitawa da daidaitawa yayin haɗawa.
2. Haɗin kai mai sassauƙa
Ana iya haɗa goro, maƙallan hannu, maƙallan hannu da sauran kayan haɗi a wurare daban-daban.
3. Tsarin Sirri Mai Tsauri
Tashar C-tanalin da aka yi da na'urar tana da matuƙar tauri don amfani da racking da firam.
4. Tsarin Modular
Ana iya haɗa tashoshi da kayan haɗi daban-daban don ƙirƙirar tsarin tallafi na musamman.
5. Ana iya gyarawa
Ana iya keɓance girman, kauri, tsarin rami, tsawonsa, da kuma kammala saman da aka yi bisa ga buƙatun aikin.
Haɗin Sinadaran da aka yi da ƙarfe mai zafi da aka yi da C Channel
Tsarin Sinadaran ASTM A36
| Daidaitacce | C | Mn | P | S | Si | Cu |
| ASTM A36 | ≤0.26% | — | ≤0.040% | ≤0.050% | ≤0.40% | ≥0.20%* |
Lura:
* Abubuwan da ke cikin manganese na ASTM A36 sun bambanta dangane da nau'in samfurin, kauri, da ƙayyadaddun masana'antu; ba duk samfuran A36 suna da matsakaicin ƙima iri ɗaya ba.
** Bukatun da ake buƙata na tagulla gabaɗaya sun shafi takamaiman yanayin yanayi/ƙarfe na tagulla; takamaiman buƙatu ya kamata su dogara ne akan ƙa'idodin siye da MTC.
Kayayyakin Inji na ASTM A36
| Daidaitacce | Ƙarfin Ba da Kyauta | Ƙarfin Taurin Kai | Ƙarawa | Modulus mai laushi | Rabon Poisson |
| ASTM A36 | ≥250 MPa (36 ksi) | 400–550 MPa (58–80 ksi) | ≥20% | ≈200 GPa | ≈0.26–0.30 |
Lura:Iyakokin sinadaran da aka ƙayyade na A36 sun bambanta dangane da nau'in samfurin (faranti, sashe, sandar, da sauransu) da kuma sassan ASTM da suka dace. Ana ba da shawarar a ƙayyade teburin ƙarshe bisa ga takamaiman ma'aunin samfurin da MTC don guje wa amfani da tsarin farantin A36 kai tsaye ga ƙarfe mai tsari.
Girman Tashar C da aka yi da ƙarfe mai zafi
| A'a. | Girman | Kauri | Nau'i | Maganin Fuskar | ||
| mm | inci | mm | Ma'auni | |||
| A | 41x21 | 1-5/8x13/16" | 1.0,1.2,1.5,2.0,2.5 | 20, 19, 17, 14, 13 | An yi masa rami, Mai ƙarfi | GI, HDG, PC |
| B | 41x25 | 1-5/8x1" | 1.0,1.2,1.5,2.0,2.5 | 20, 19, 17, 14, 13 | An yi masa rami, Mai ƙarfi | GI, HDG, PC |
| C | 41x41 | 1-5/8x1-5/8" | 1.0,1.2,1.5,2.0,2.5 | 20, 19, 17, 14, 13 | An yi masa rami, Mai ƙarfi | GI, HDG, PC |
| D | 41x62 | 1-5/8x2-7/16" | 1.0,1.2,1.5,2.0,2.5 | 20, 19, 17, 14, 13 | An yi masa rami, Mai ƙarfi | GI, HDG, PC |
| E | 41x82 | 1-5/8x3-1/4" | 1.0,1.2,1.5,2.0,2.5 | 20, 19, 17, 14, 13 | An yi masa rami, Mai ƙarfi | GI, HDG, PC |
A shirye don neman ƙarin bayani?
Tsarin Kera Tashar C Tashar Karfe Mai Zafi
1. Zaɓin Kayan Danye
Ana zaɓar takardar ƙarfe mai inganci bisa ga matakin da ake buƙata, kauri, ƙirar shafi, da kuma kaddarorin injiniya.
2. Ragewa
Ana raba na'urorin ƙarfe zuwa faɗin da ya dace bisa ga girman tashar C da ake buƙata.
3. Tsarin Naɗi
Zaren yana ratsawa ta cikin jerin na'urori masu yin birgima don ƙirƙirar sashin giciye mai siffar C a hankali yayin da yake kiyaye daidaiton girma.
4. Naushewa da Yankewa
Ana iya huda ramukan bolt, ramukan ramummuka, ramukan sabis, da sauran ramuka bisa ga zane-zane. Sannan ana yanke tashar zuwa tsawon da aka ƙayyade.
5. Duba Inganci
Ana duba girma, kauri, daidaito, yanayin saman, ingancin shafi, da kuma halayen injiniya bisa ga ƙa'idodin da aka amince da su.
6. Shiryawa da jigilar kaya
An haɗa tashoshin C da aka gama da madaurin ƙarfe kuma an kare su don jigilar kaya ta ƙasashen waje.
Aikace-aikace
Tsarin Lantarki:Ana amfani da shi ga wurare daban-daban, ciki har da tiren kebul, bututun ruwa, injinan lantarki, da kuma shugabannin wayoyi.
Tsarin HVAC:An ƙera shi don tallafawa hanyoyin samun iska, na'urorin sanyaya iska, da bututun ruwa.
Tallafin Bututu da Bututu:Ana iya haɗa rakkunan bututu masu daidaitawa da firam ɗin tallafi tare da su.
Shigar da hasken rana:Ana kuma amfani da hanyoyin strut a cikin hanyoyin haɗa hasken rana da kuma hanyoyin tallafi.
Tsarin Masana'antu:Don amfani a cikin firam ɗin kayan aiki, racks, dandamali da tsarin tallafi na modular.
Ƙirƙira na Musamman
Kamfanin Royal Steel Group zai iya samar da tsarin sarrafawa na musamman bisa ga zane-zanen abokin ciniki.
Ayyukan da ake da su sun haɗa da:
1. Yanke tsawon al'ada
2. Naushi a Ramin
3. Huda rami
4. Hakowa
5. Walda
6. Maganin saman
7. Marufi na musamman
Tsawon yau da kullun kamar 6m da mita 12suna samuwa, yayin da tsayin da aka keɓance za a iya samar da su bisa ga buƙatun aikin.
Me yasa Zabi Royal Steel Group
1. Ƙwarewar Hawan Hasken Rana– Karfe mai tsawon 41×41mm C don tsarin hawa PV, mai riƙe da panel na hasken rana, da aikin gini.
2. Keɓancewa Mai Sauƙi- Akwai kauri na musamman, tsayi, tsarin rami, tazara tsakanin ramuka, da kuma maganin saman, da sauransu. Ana samun su akan zane da buƙatun aikin.
3. Tsarin Inganci Mai Ƙarfi- Ana iya tallafawa duk odar tare da MTC, rahotannin dubawa da kuma dubawa na ɓangare na uku idan ana buƙata.
4. Kwarewar Fitar da Kaya a Duniya– Kamfanin Royal Steel Group yana isar da kayayyakin ƙarfe da mafita na musamman ga aikin ginin ku, hasken rana, kayayyakin more rayuwa, ko ayyukan masana'antu, a ko'ina cikin duniya.
5. Sabis na Ƙwararru– Tallafin fasaha, samarwa na musamman, marufi na fitarwa da isar da kaya cikin inganci suna nan a hannunku don kammala aikin ba tare da matsala ba.
Marufi & Jigilar Kaya
Kamfanin Royal Steel Group yana samar da ingantattun marufi da kuma hanyoyin jigilar kaya masu sassauci,Tashoshin Zafi na Galvanized Slotted Strut, yana taimakawa wajen tabbatar da cewa kayayyakin sun isa lafiya kuma cikin kyakkyawan yanayi.
Marufi Mai Haɗewa:Ana haɗa hanyoyin strut lafiya da ƙarfemadauri don hana motsi da nakasa yayin jigilar kaya.
Kunshin kariya:Ana iya ƙara naɗewa mai hana ruwa shiga da kayan kariya don jigilar kaya daga nesa da teku.
Marufi na Musamman:Ana iya keɓance hanyoyin marufi, nauyin fakiti, lakabi, da alamomi bisa ga buƙatun abokin ciniki.
Jigilar Kwantena:Ya dace da yin oda na yau da kullun da na manya, tare da ingantaccen ɗaukar kaya don haɓaka sararin kwantena.
Jigilar kaya da yawa:Akwai don yin oda mai yawa idan ya dace da tattalin arziki.
Fitar da Takardu:Ana iya bayar da takardar lissafin kasuwanci, jerin kayan tattarawa, MTC, da sauran takaddun jigilar kaya da ake buƙata.
Isarwa ta Duniya:Muna shirya jigilar kaya zuwa tashoshin jiragen ruwa da wurare a duk duniya tare da tallafin kayan aiki na ƙwararru.
Tambayoyin da ake yawan yi akai-akai
T1: Shin tashar strut tana da ramuka?
A: Eh. Dukansu biyunmai ramikumabayyananneakwai nau'ikan.Tashoshin da aka sakasamar da sassauci mafi girma don matsayi da daidaitawa yayin shigarwa.
Q2: Wadanne kauri ne ake samu?
A: Kauri na yau da kullun ya haɗa da1.5 mm, 2.0 mm da 2.5 mm, tare da wasu kauri da ake samu dangane da samfurin da buƙatun aikin.
Q3: Wadanne tsawon suna samuwa?
A: Tsawon da aka saba amfani da shi ya haɗa damita 6 da mita 12, yayin da tsayin da aka yanke na musamman za a iya bayarwa bisa ga buƙatu.
Q4: Za ku iya samar da tashar strut mai zafi da aka yi da galvanized?
A: Eh. Kamfanin Royal Steel Group yana samar da HDG, galvanized da sauran kayan da aka yi wa magani a saman.tashoshin strutdon yanayi da aikace-aikace daban-daban.
Q5: Zan iya yin odar tashar strut ta musamman?
A: Eh. Abokan ciniki za su iya ƙayyade girma, kauri, tsarin rami, kayan aiki, maganin saman, tsawonsa, adadi da buƙatun marufi don ƙididdigewa na musamman.
Rubuta saƙonka a nan ka aika mana da shi
